Abstract:In this study, a novel modeling method for a dual-rotor-bearing-casing system is proposed based on the finite element method (FEM) and the model reduction method. The dual-rotor system is modeled using Timoshenko beam and rigid disc elements, while the casing is modeled using shell elements. To reduce the number of degrees of freedom (DOFs), the modified Craig-Bampton method is used to downscale the finite element model of the casing. In addition, the Hertzian contact force and the DOFs of the bearing outer race and pedestal are considered in the bearing model. Through a specific assembly method, a dynamic model of the dual-rotor-bearing-casing is established at the expense of slight increase in the number of DOFs. Based on this dynamic model with fewer DOFs, the effects of two disc imbalances and the rub-impact fault between the low-pressure (LP) turbine and casing are then introduced as an application of the proposed model. The calculation results indicate that the critical speeds of each order of the whole aero-engine model are significantly lower than those of the casing-free model. In the amplitude-frequency diagram, the peak of the critical speed of the whole aero-engine model is found to appear earlier, and the extent of rightward bending is larger. The study also includes parametric analysis to examine the effects of parameters such as the coefficient of friction, the casing-disc contact stiffness, and the casing-foundation connection stiffness. After introducing the nonlinear bearing model, a large number of fractional frequency components are found in the frequency-domain diagram, the dynamic characteristics of the model become more complicated. The coupled bending-torsional effect has also been studied in detail, the calculation results show that it is reasonable to ignore the torsional deformation.

Finite Element Modal Analysis of Heavy-duty Gas Turbine Casing

Analysis of Strength and Stiffness for Heavy-duty Gas Turbine Casing

FEM-based Multi-field Coupling Stress Analyses of the Cylinder-bolts System in a Gas Turbine Power Plant

Semi-analytical Vibration Analysis of FGM Cylindrical Shells Surrounded by Elastic Foundations in a Thermal Environment

Finite Element Analysis of Spindle Thermal Character Based on Thermal Contact Resistance

Topological Structure Optimization of Finite Element based on Modal Analysis about Steam Turbine Blade

Characteristics and mechanisms of turboshaft engine axial compressor casing containment

Finite Element Structural Analysis for Bearing System of Heavy-duty Gas Turbine

Dynamic Characteristics of an Elastic Structure with Thermal Effects

Modal Analysis of Aeronautic Spiral Bevel Gear in the Temperature Field

Heat Transfer Characteristics of an Aeroengine Turbine Casing Based on CFD and the Surrogate Model

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

Modal Coupling Vibration Analysis of Bolted Casing System Based on Surface Contact Mechanics

Modal test and finite element analysis of a turbine disk

Numerical Analysis of Casing Damage in Heavy Oil Thermal Recovery Wells

A double integral method for quantitative evaluation of influence on thin-walled casing response caused by bearing uncertainties

Modeling strategy and dynamic analysis of a dual-rotor-bearing-casing system in aero-engine

A Finite Element Method Approach to the Temperature Distribution in the Inner Casing of a Steam Turbine in a Combined Cycle Power Plant

Modal analysis of turbine based on fluid-thermo-structure coupling

Spatial Overall Analysis of the Electrostatic Precipitator Casing Load Bearing Performance

Couple CFD-FE-Analysis for a Gasoline Engine Exhaust Manifold of Thermal Load