Abstract:The aero-elastic response of the blades is affected by the structure style of the rotor hub. The fatigue life of the structure and the vibration level of the entire helicopter are directly affected by the aero-elastic response of the blades. Therefore, its vibration characteristics and aero-elastic response shall be considered emphatically during structure design. The flapping and lead-lag characteristics of the rotor hub were tested experimentally in the paper. It was shown in results that a big vibration displacement was generated from the rotor hub under two working conditions. However, a larger vibration displacement was generated from the flapping than that of the lead-lag. Therefore, it is necessary to conduct optimization design to the rotor hub. Analysis was carried out to aero-elastic dynamics of bearing-less rotor. Afterwards, a multi-objective optimization model for reducing vibration and aero-elastic dynamic of bearing-less rotor was built. Pareto front of multi-objective optimization design for bearing-less rotor was acquired by Genetic Algorithm (GA). To reduce the optimization burdens, the aero-elastic dynamic model was replaced by Radial Basis Function (RBF) model during the optimization. To decrease the computational costs, the sample points with the minimum point set center deviation of the current surrogate model were added gradually. Meanwhile, the design schemes of Pareto front were ranked by TOPSIS to select the design scheme with the maximum satisfaction. Comparison was carried out between the rotor design scheme with the maximum satisfaction and the unoptimized model in terms of modal frequency, modal shape and vibration load of the hub. The results showed that the dynamic performance of the optimized rotor was improved significantly. The method in this paper also provided an important reference for multi-objective optimization of aero-elastic dynamic and engineering design of other rotors.

Rotor Structure Optimal Design Based on Genetic Algorithms

Rotordynamics Optimization Based on a Hybrid Genetic Algorithm

Research on the Methods of Optimal Design of Taper Roller Bearing Based on Improved Genetic Algorithm

Constrained Optimization of A Rotor-Bearing System Based on an Evolutionary Algorithm

Optimum Design Of Rotor-Bearing Systems Considering The Nonlinear Effects Of Bearing Fluid Forces

Vibration Characteristic Analysis and Optimization of Rotor Hub for Helicopters Based on Genetic Algorithm

A Novel Optimization Method to Improve Assembly Concentricity of Aero-Engine Rotor with Bolted Flange Joints Using Genetic Algorithms

Research on Multistage Rotor Assembly Optimization Methods for Aeroengine Based on the Genetic Algorithm

Structural design optimization of a wind turbine blade using the genetic algorithm

Optimization Of Wind Turbine Blades Using Lifting Surface Method And Genetic Algorithm

Design Optimization Of Transonic Compressor Rotor Using Cfd And Genetic Algorithm

Study on Rotor Critical Speeds Optimal Adjustment to Disks Positions

Improved method for adjusting critical speeds of rotor systems

Design Optimization on Automobile Final Drive in Genetic Algorithm and Neural Network

Double-stage multi-objective optimized design for cycloid pinwheel reducer based on genetic algorithm

Global aerodynamic optimization method using genetic algorithms and surrogate model

Topology Optimization of Rotor Structure in Brushless DC Motor With Concentrated Windings Using Genetic Algorithm Combined With Cluster of Material

A Genetic Algorithm Based Balancing Framework for Flexible Rotors

An Unbalance Optimization Method for a Multi-Stage Rotor Based on an Assembly Error Propagation Model

On Genetic Algorithm and Artificial Neural Network Combined Optimization for a Mars Rotorcraft Blade

Aerodynamic Optimum Design of Transonic Turbine Cascades Using Genetic Algorithms