Abstract:Tiltrotor aircraft combine the vertical take-off and landing capability of a helicopter with the high cruising speed of a fixed-wing airplane. During flight, the aircraft switches between helicopter and airplane modes. Meanwhile, structural vibration and deformation are affected by changes in the aerodynamic loads, collective pitch, and rotation speed of blades. Therefore, it is crucial to consider dynamic characteristics in different modes. This paper presents a surrogate-based structural design framework of a tiltrotor blade to speed up calculations while maintaining accuracy. The shape generation method, rapid finite element method (FEM) model generation, and simplified boundary conditions are implemented to compute the blade modal frequencies, mass and inertia. A B-spline is used to construct the shape of the blade with the distribution of airfoils, twist angles, chord length, swept angles, and dihedral angles. These geometric features are realized by approximation, rotation, translation, and scaling of the control points. The spanwise distribution of the C-beam area and the width and length of the skins are selected to parameterize and establish the FEM model. The blind kriging model is applied to develop a surrogate model. The precision of this surrogate model is evaluated and compared to the kriging model and backpropagation neural network (BPNN) model based on the blade of an eight-ton-weight aircraft. A blade with a linear spanwise distribution of the C-beam area is designed using these three surrogate models trained by 13 samples. The results reveal that the error of the blind kriging model concerning the first four modal frequencies is less than 0.5% and lower than that of the other two models. A gimbal hub is modeled using a combination of a simply supported and a clamped boundary condition at the root. The two boundary conditions and two working conditions are unified into one working condition since a linear relationship is found. Moreover, the effects of the segmented linearly distributed cross-sectional area of the C-beam and the geometric parameters of the skins are investigated. The tip and root of the C-beam have the most significant influence on the low-order modal frequency. The parameters of the skins have opposite effects on the 1st and 2nd flap frequencies and the 1st torsion frequency. This framework provides a complete design process on the basis of geometric features and design parameters in the structure design, reducing the design variables. The use of the surrogate model and simplified working conditions reduce the consumption of time in the design. Conclusions about the tiltrotor blade have reference significance in the design stage.

Vibration Characteristic Analysis and Optimization of Rotor Hub for Helicopters Based on Genetic Algorithm

Design and Hover Test of Low Vibration Mach Scale Rotor with Twisted Composite Tailored Blade

Large-Sized Multirotor Design: Accurate Modeling with Aerodynamics and Optimization for Rotor Tilt Angle

Numerical and Experimental Study on the Multiobjective Optimization of a Two-Disk Flexible Rotor System

Aero-Engine Rotor Assembly Process Optimization Based on Improved Harris Hawk Algorithm

Multidisciplinary Aerodynamic Design of a Rotor Blade for an Optimum Rotor Speed Helicopter

Multi-objective Optimization of Active Dry Friction Damper-Rotor Systems Based on Predictive Control

Automated Design Optimization of a Mono Tiltrotor in Hovering and Cruising States

Research on Multistage Rotor Assembly Optimization Methods for Aeroengine Based on the Genetic Algorithm

Structural design optimization of a high-speed rotor system for mechanical vibration mitigation

Anti-vibration Optimization of the Key Components in a Turbo-Generator Based on Heterogeneous Axiomatic Design

Optimization of a Centrifugal Pump to Improve Hydraulic Efficiency and Reduce Hydro-Induced Vibration

A Vibration Suppression Method for the Multistage Rotor of an Aero-Engine Based on Assembly Optimization

Rotor Cross-Tilt Optimization of Manned Multi-rotor Evtol Aircraft for Yaw Control Efficiency

Aeroelastic analysis and structural parametric design of composite rotor blade

Blade Shape Optimization and Analysis of a Propeller for VTOL Based on an Inverse Method

Blade Sorting Method for Unbalance Minimization of an Aeroengine Concentric Rotor

Helicopter main rotor FSI analysis using parametric blade model as an application for multidisciplinary optimization

An rVPM-Based Aerodynamic Hybrid Optimization Method for Coaxial Rotor with Differentiated Upper and Lower Blades in Both Hover and High-Speed Cruising States

A Study of Multi-Objective Aerodynamic Optimization Design for Variable Camber Airfoils and High Lift Devices

Surrogate Model-Based Parametric Structural Design of a Composite Tiltrotor Blade