Abstract:In order to improve the operating performance for cycloid pinwheel reducer in fields of transmission efficiency, compacted structure, load-bearing capacity, and tooth profile modification. A double-stage multi-objective optimized method is proposed that considers for parameters of structure and modification. Firstly, taking the high transmission efficiency and small volume of reducer as objectives, the constraint conditions included structural parameter size and strength limitations were analyzed. Based on genetic algorithm, the mathematical model for structural parameters of cycloid pinwheel reducer was established as the first-stage optimization; secondly, the algorithm of meshing force and the deviation between rotated angle modification and equidistance and moved distance combination modification were derived, taking the low meshing force and deviation as objectives, the theoretical model for modification parameters of equidistant and moved distance amount was proposed as the second-stage optimization. The results indicate that the comprehensive performance for cycloid pinwheel reducer can be improved effectively after optimization.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is in the field of mechanical transmission, how to improve the comprehensive performance of the arc - cycloid wheel reducer through optimal design, especially in terms of transmission efficiency, structural compactness, load - bearing capacity and tooth profile modification. Specifically, the paper proposes a two - stage multi - objective optimization method based on the genetic algorithm to achieve the optimal design of the structural parameters and tooth profile modification parameters of the arc - cycloid wheel reducer. ### First - stage Optimization The optimization objective in the first stage is to improve the transmission efficiency and reduce the volume of the reducer. For this purpose, the author analyzes the constraint conditions such as the size of the structural parameters and the strength limit, and establishes a mathematical model of the structural parameters of the arc - cycloid wheel reducer. The genetic algorithm is used for optimization to obtain the optimal combination of structural parameters. ### Second - stage Optimization The optimization objective in the second stage is to reduce the meshing force and the deviation between the rotation angle modification and the combination modification of the equidistant and moving distances. Based on the Hertz contact theory and the multi - tooth meshing principle, a theoretical model of the meshing force and deviation is established. The genetic algorithm is also used for optimization to obtain the optimal combination of modification parameters. ### Optimization Results Through the optimization of the two stages, the paper shows that the comprehensive performance of the arc - cycloid wheel reducer has been significantly improved. Specifically: - The transmission efficiency has been increased by 3.36%. - The total volume has been reduced by 35.9%. - The meshing force has been reduced from 381.8 N to 240.9 N. - The deviation between the rotation angle modification and the combination modification has been reduced from 0.048 to 0.0255. These optimization results not only improve the transmission efficiency and structural compactness of the reducer, but also improve its load - bearing capacity and tooth profile modification effect, thereby enhancing the overall performance.

Double-stage multi-objective optimized design for cycloid pinwheel reducer based on genetic algorithm

Multi-objective optimized design for modified cycloid-pin gear drive mechanism based on load-bearing capacity

Multi-objective optimal design of cycloid speed reducer based on genetic algorithm

Influence of cycloid pinwheel reducer structure parameters on transmission performance and optimized design with considering friction loss

Multi-objective optimization design of cycloid pin gear planetary reducer

Multi-objective optimization of cycloidal gear based on segmental modification of pressure angle

Optimization modelling and application scenario for cycloid-pin gear mechanism based on force transmission characteristics

Multi-Objective Optimization Design of Cycloid-Pin Gears Based on RV Reducer Precision Transmission Performance

Study of the Transmission Characteristics of the Cycloid Gear Based on a Multi-Objective Optimization Modification

Study and Performance Test of Full Complement Cycloidal Ball Reducer with Ceramic Balls as its Gear Teeth

Research on the Methods of Optimal Design of Taper Roller Bearing Based on Improved Genetic Algorithm

Contact analysis of output mechanism of cycloidal pinwheel reducer

Multi-objective optimization design of dual-cone double enveloping hourglass worm gear pair

A New Design of Cycloidal Planetary Reducer With Internal Cycloidal Profile

Design and dynamic transmission error analysis of a new type of cycloidal-pin reducer with a rotatable output-pin mechanism

Geometric design and dynamic characteristics of a novel abnormal cycloidal gear reducer

Optimization Design of Three-Stage Cylindrical Gear Reducer

A New Tooth Profile Modification Method of Cycloidal Gears in Precision Reducers for Robots

A New Design of a Two-Stage Cycloidal Speed Reducer