Abstract:The microstructures and mechanical properties of Mg-5Y-2Nd-xSm-0.5Zr (x = 0, 1, 3, 5) alloys were investigated. The results indicated that a new Mg41Sm5 phase was generated in the as-cast Sm-containing alloys. As the Sm content was increased, the grain of a-Mg matrix was refined and the amount of second phases at the grain boundary increased. After the solution and aging treatment, a large number of beta' phases precipitated, the alloys mainly consisted of alpha-Mg, Mg24Y5, Mg41Nd5 and Mg41Sm5. The grain size significantly reduces from 80 mu m to 23 mu m with the increasing of Sm content. Under all conditions in this paper, Mg-5Y-2Nd-3Sm-0.5Zr alloy had the best mechanical properties. The tensile strength and elongation of the aged Mg-5Y-2Nd-3Sm-0.5Zr alloy were 296.9 MPa, 4.78% room temperature and 279.4 MPa, 6.43% at 250 degrees C, respectively. The mechanical properties of this alloy is obviously superior to the commercial WE54 alloy with equivalent total rare earth content, which has excellent heat resistance and can be reliably applied below 250 degrees C. The improving of the mechanical properties is mainly due to grain refining strengthening, solid solution strengthening and precipitation strengthening of the beta'-Mg41Sm5 phase.

Effect of rare-earth element Sm on the corrosion behavior of Mg-6Al-1.2Y-0.9Nd alloy

Effect of Sm on Corrosion Behavior of Mg-6Al Alloy

Corrosion Behaviour and Electrochemistry of Mg-5Y-2Nd-0.5Zr-xSm (x=0, 1, 3 and 5) Alloys in 3.5 Wt.% NaCl

Effect of Sn on Corrosion Resistance of Mg-6Al-1.2Y-0.9Nd Alloy

EFFECTS OF Sn ON MICROSTRUCTURES AND CORROSION RESISTANCE OF Mg-6Al-1.2Y-0.9Nd MAGNESIUM ALLOY

Effect of Sm Additions on the Microstructure and Corrosion Behavior of Magnesium Alloy AZ91

Effects of Sm on Microstructure and Mechanical Properties of Mg-5.5al-0.5y Alloy

Effect of Combined Addition of La and Sm on Mechanical Properties, Microstructure Evolution, and Electrochemical Behavior of Mg-3Zn-1Mn/Sn-0.5Ca Alloy

Effect of Y Content on Corrosion Resistance of Mg-Zn-Y Alloys

Effects of Rare Earth Yttrium on Microstructure and Properties of Mg-Al-Zn Alloy

Effect of Heat Treatment on Corrosion Performance of Mg-12Gd-3Y-1Sm-0.8Al Alloy

Effects of Sm content on microstructures and mechanical properties of casting Mg-Y-Nd-Sm-Zr alloys

Influence of Nd and Y Additions on the Corrosion Behaviour of Extruded Mg-Zn-Zr Alloys

Microstructure and Corrosion Resistance of Mg-5Al-1Sr-2Ca-XY Alloy

Effects of Sm Addition on Microstructure and Mechanical Properties of Mg–6Al–0.6Zn Alloy

Influence of Yttrium Addition on the Corrosion Behaviour of As-Cast Mg–8Li–3Al–2Zn Alloy

Effects of Alloying Elements on the Microstructure and Corrosion Behavior of Mg–Li–Al–Y Alloys

Effect of Sm on Microstructures and Mechanical Properties of Mg-10Gd-0.5Zr Alloy

Strategy for co-enhancement of corrosion resistance-strength of Cu-7Ni-3Al-1Fe-1Mn alloy: Rare earth Sm microalloying

Effect of Sm on Microstructure, Mechanical Property and Lattice Constant of As-Cast Mg–11Gd–2Y–0.6Al Alloy

Effects of Gd on Microstructure and Corrosion Resistance of Mg-Gd-Y-Sm-Zr Rare Earth Magnesium Alloys