Abstract:The selective laser melting (SLM) technique is progressively changing the traditional manufacturing processes due to rapid molding and high forming accuracy. However, the density and microstructure induced by the process parameters have a significant influence on the material properties. In general, these process parameter windows are obtained experimentally based on the energy density requirements of the material. The combination of schemes is often huge in number, which is a time-consuming and laborious process. On the other hand, the fluctuations in molten pool temperature influence the printing quality of the part, resulting in differences in performance. The orthogonal experimental design method was used to determine the macroscopic properties of SLM-ed AlSi10Mg parts in this work. Combining the density and mechanical properties, the optimal process parameter window was deduced, and the influence of critical process parameters was investigated via range analysis. The optical microscope (OM) and scanning electron microscope (SEM) observations were used to correlate the microstructure to macroscopic properties. The influence mechanism of layer thickness and volumetric energy density (VED) variation on the molten pool morphology was investigated by the finite element method. The knowledge of optimized process parameters is essential for SLM-ed parts with better mechanical properties, which could more accurately guide the structural design.

Process Analysis of Rapid Prototyping with Selective Laser Melting

Simulation of the Temperature Field in Rapid Prototyping of Selective Laser Melting

Experimental Researches on Rapid Forming Full Compacted Metal Parts by Selective Laser Melting

Study on the Effects of Powder Properties on the Performance of Stainless Steel Parts Produced by Selective Laser Melting

Comparisons of Indirect Selective Laser Sintering with Selective Laser Melting

Research on Selective Laser Melting System and Technologic Experiment

Optimized Scanning Path Algorithm Based on Selective Laser Melting Rapid Prototyping Technology

Effects of Processing Parameters on Rapid Manufacturing 90w–7ni–3fe Parts Via Selective Laser Melting

Newest Progress of Direct Rapid Prototyping of Metal Part by Selective Laser Melting

A Note on Rapid Manufacturing Process of Metallic Parts Based on SLS Plastic Prototype

Direct Manufacturing of Cu-based Alloy Parts by Selective Laser Melting

Rapid prediction of the relationship between processing parameters and molten pool during selective laser melting of cobalt-chromium alloy powder: Simulation and experiment

Comparative research on direct laser fabrication and selective laser melting

Finite Element Analysis of Thermal Behavior and Experimental Investigation of Ti6Al4V in Selective Laser Melting

Process parameter optimization and mechanical properties for selective laser melting of AlSi10Mg alloy

Optimization of Molten Metal Line Morphology in Selective Laser Melting

Numerical and Experimental Investigation of Molten Metal Droplet Deposition Applied to Rapid Prototyping

Rapid Manufacturing of Customized Metal Parts Based on CT Reverse Engineering by SLM

Effects of the processing parameters on the forming quality of stainless steel parts by Selective Laser Melting

Hybrid Deposition & Milling Rapid Prototyping Manufacture Metal Part

Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder