Abstract:In the development of advanced steel, accurate and detailed knowledge about the kinetics of phase transformations and microstructure formation is critical. The critical issue in pearlite-austenite transformation is the consideration of diffusional paths of the alloy element. Simulation has been an available method to study the diffusion of alloy elements and the migration rate of the phase boundary in the complex morphological evolution of austenite growth. The isothermal pearlite-austenite transformations at 720 and 740 degrees C in Fe-0.6%C-2%Mn (mass fraction) alloy were studied by phase-field methods based on MICRESS. At different temperatures, the effects of diffusional paths on the austenite transformation were discussed. To achieve a semiquantitative verification of the simulated results, the migration rates of the austenite/pearlite boundary at 720 and 740 degrees C were estimated from the experimental kinetics curves by fitting the JMA equation. By measuring the Mn profile in austenite, the modes of the austenization at 720 and 740 degrees C can be verified as partitioned local equilibrium (PLE) and non-partitioned local equilibrium (NPLE) modes. The heterogeneous distribution of Mn in austenite at 740 degrees C can be observed with STEM-EDS. However, the homogenous distribution of Mn can be found near the pearlite/austenite boundary in austenite at 720 degrees C. The cases considering the gamma, alpha, and interface-diffusional paths were simulated by phase-field methods to compare with the migration rates of the austenite/pearlite boundary. Because carbon is an interstitial element in steel and has an interstitial diffusional mechanism, it can be speculated reasonably that the diffusion of C mainly proceeded in austenite and ferrite through the considerations of the atom-size of carbon and the experimental results. Phase-field methods were used to study Mn diffusion in the lamellar pearlite-austenite transformation. With the analysis of the experimental estimations, the interface-diffusional path was observed as the dominant path for the Mn diffusion. It is because the Mn atoms have greater diffusivity in interfaces than in gamma or alpha-diffusional paths. Furthermore, the diffusional activation energy is closely related to the diffusivity of Mn at the interface. Moreover, compared with the gamma-diffusional path, the diffusional flux of Mn in ferrite is much larger than that in austenite. Thus, it can be concluded that the contribution of the alpha-diffusional path to the migration rate of the pearlite/austenite boundary is larger than that of the gamma-diffusional path. As a result, considering the alpha-diffusional path in the thermodynamics analysis under NPLE mode makes more sense. However, ignoring the interface- and alpha-diffusional path, which is different from the traditional cognition in PLE mode, will result in a magnitude error for the thermodynamics analysis.

Perspective in Phase Transformation Studies and Primary Suggestion on Developing 《Materials Morphology》(or《Study of Morphology in Materials》)

On Basic Study of Phase Transformation

Studies on Phase Transformations and Their Applications in Materials Engineering

Simulation of lamellar pearlite growth morphology with phase-field method

Perspective in Application of the Phase Field Theory to Smart Materials Performance

Light-weight Isometric-Phase Steels with Superior Strength-Hardness-ductility Combination

Study Progress in Phase-field Simulation of Directional Solidification Microstructure

Austenite/Ferrite Interface Migration and Alloying Elements Partitioning: an Overview

Phase-field method of materials microstructures and properties

An Overview of the Cyclic Partial Austenite-Ferrite Transformation Concept and Its Potential

Theory and Modeling of Phase Transformations under Stress in Steel

New Frontiers in the Phase Structure and Functional Properties of Materials

Perspectives on phase engineering of nanomaterials

Phase field molding on the morphologies and growth kinetics of grain boundary ferrite allotriomorphs

Towards the ab initio based theory of the phase transformations in iron and steel

Phase-field Simulation of Austenite Growth Behavior: Insights into the Austenite Memory Phenomenon

Phase-field modeling of microstructure evolution: Recent applications, perspectives and challenges

Progress in Effect of Alloying Element Partition on Thermodynamics and Kinetics of Pearlite Transformation and Its Austenitization

Structural Transformation of Unconventional-Phase Materials

Phase Field Study of the Diffusional Paths in Pearlite-Austenite Transformation

Phase field modeling for the morphological and microstructural evolution of metallic materials under environmental attack