Abstract:Abstract Element incorporation and partitioning during the evolution of clay minerals have significant implications for element cycling in geochemical processes. The main aim of this experimental study is to further our understanding of element redistribution and crystal growth during smectite evolution under different physicochemical conditions. The precursors (i.e., pure Mg- and Ni-saponite) were separately prepared by hydrothermal syntheses at the same set of temperatures (i.e., RT, 50, 150, 180, 200, and 220 °C) for one day. Then the starting materials were obtained from the mechanical mixtures of the identical molar weight of Mg- and Ni-smectite precursors prepared at the same temperature. Subsequently, Series I samples were obtained by hydrothermally treating different starting materials at 220 °C for two weeks while Series II samples were hydrothermally synthesized under various temperatures (220, 300, 400, and 500 °C) for one week using the starting materials prepared at 220 °C. Both the precursors and resultant saponites were characterized by XRD, FTIR, TEM, and STEM. The FTIR spectra of the precursors only exhibit the vMg3OH and vNi3OH bands, corresponding to Mg-saponite and Ni-saponite, respectively. However, the occurrence of vMg2NiOH and vNi2MgOH bands in the resultant saponite indicates the dissolution of the corresponding Mg- and Ni-saponite precursors and recrystallization of Mg-Ni mixed saponite. The dissolution extents of Mg- and Ni-saponite precursors, which affect the degrees of random distribution of octahedral Ni and Mg in resultant Mg, Nisaponite, are significantly controlled by the temperature gap (ΔT) between the precursors prepared and the resultant Mg, Ni-saponite obtained. In general, a larger ΔT leads to a higher dissolution extent of saponite precursors and a higher degree of random distribution of octahedral Ni and Mg cations in the resultant Mg, Ni-saponite structures. Thus, the distribution mode of octahedral cations in saponite, which is not only relevant to a given hydrothermal temperature but also dependent on ΔT for final products, cannot be used as a geothermometer. TEM and STEM observations provide visual evidence that the particles of saponite coarsen when ΔT is higher than zero. Both the crystal-chemical and morphological features during saponite evolution suggest that saponite particles coarsen mainly via partial/complete dissolution of precursors followed by recrystallization and growth of Mg, Ni-saponite in which crystal growth by layer attachment cannot be excluded. This study presents an experimental approach to evaluate the evolution of clay minerals in terms of crystal chemistry and crystal growth and offers a better understanding of the contributions of clay mineral evolution to element cycling.

Application of Ftir Technique in Microwave-Hydrothermal Synthesis of Saponite

The evolution of saponite: An experimental study based on crystal chemistry and crystal growth

Effects of the synthesis hydrogel on the formation of zeolite LTA membranes

Influences of anions X-(F-, Cl-, Br-) on synthesis and properties of mesoporous molecular sieve MCM -41

Mechanism of saponite crystallization from a rapidly formed amorphous intermediate

Synthesis of Pure-Silica Mtw Powder and Supported Films

The growth process of saponite: A study based on particle size distributions and morphological evolution

High-temperature Synthesis of Ordered Mesoporous Silicas from Solo Hydrocarbonsurfactants and Understanding of Their Synthetic Mechanisms

Effects of Instrumental Configuration, Sample Preparation, and Pretreatment on the IR spectra of Silicalite-1

Sonohydrothermal synthesis of zeolite A and its phase transformation into sodalite

Microwave-Assisted Hydrothermal Synthesis of Pure-Phase Sodalite (>99 wt.%) in Suspension: Methodology Design and Verification

Synthesis and Properties of Nanoparticle Forms Saponite Clay, Cancrinite Zeolite and Phase Mixtures Thereof

Templating of high-silica zeolites by tetrahydrofuran in the Na2O – SiO2 – Al2O3 – H2O system

Hydrothermal Synthesis of Chlorite from Saponite: Mechanisms of Smectite-Chlorite Conversion and Influence of Mg2+ and Al3+ Supplies

Temperature-Driven Structural Evolution during Preparation of MCM-41 Mesoporous Silica

Synthesis and crystal morphology control of AlPO4-5 molecular sieves by microwave irradiation

High-Temperature Synthesis of Zeolite Y

Transformation of Lamellar Silicate into the Mesoporous Molecular Sieve MCM-41

Characterization of Organic Phases in the Interlayer of Montmorillonite Using FTIR and 13C NMR.

Synthesis and Characterization of Pillared High Layer Charged Synthetic Saponite

Effect of Surfactant Concentration on the Physico-chemical Characteristics of Mesoporous Molecular Sieve