Abstract:This study explores the effect of internal gas pressure (P) on closed-cell natural rubber (NR) foams. Three key factors are analyzed using a 3D model during uniaxial compression: (1) the initial gas pressure (P0 = 1, 2, and 3 atm) inside the cells, (2) different cell sizes (D = 0.1, 0.2, 0.3, and 0.4 mm in diameter), and (3) the presence of defects (holes in the cell walls) in terms of their sizes (d = 0.07 to 0.1 mm). The findings reveal a negative relationship between the initial gas pressure and the relative internal gas pressure (α = P/P0) and a direct correlation with stress during compression. For instance, a change from 1 to 3 atm of the initial internal gas pressure results in a 158% decrease in α with only a 3% increase in stress. Larger cell sizes contribute to higher α but lower stress levels during compression. Changing the cell size from 0.1 to 0.4 mm generates a 27% increase in α but a 45% drop in stress. An analysis of hole sizes (cell connection) indicates that larger holes result in higher relative internal gas pressure, while smaller holes lead to higher stress levels because of more flow restriction. For example, increasing the hole size from 0.07 to 0.1 mm leads to an 8% higher α but a 32% stress reduction. These findings highlight the significant effect of the internal gas pressure inside the cells in determining the mechanical properties of rubber foams, which are generally neglected. The results also provide useful insights for better material design and different industrial applications. This study also generates predictive models to understand the relationships between stress, strain, initial gas pressure, cell size, and defects (holes/connections), enabling the production of tailor-made rubber foams by controlling their mechanical behavior.

Deformation Of Closed-Cell Foams Incorporating The Effect Of Inner Gas Pressure

Numerical Analysis of Elastoplastic Behavior of Foams with Ellipsoidal Pores

Elasto-Plastic Behaviour of Transversely Isotropic Cellular Materials with Inner Gas Pressure

Impact Properties of Uniaxially Thermoformed Auxetic Foams

A Numerical Study on the Large Deformations of Polymer Foams with Spherical Pores

Nonlinear Compressive Behaviors of Closed-Cell Aluminum-Alloy Foams at Finite Deformation

Deformation mechanism of closed-cell aluminum foam under uniaxial compression

The Effect of Internal Gas Pressure on the Compression Properties of Natural Rubber Foams

Micro-Inertia Effect and Dynamic Poisson'S Ratio of Closed-Cell Metallic Foams under Compression

Effect of cell structure on elastoplastic behavior of closed-cell foam material

The Properties of the Poisson’s Ratio of Microcellular Foams with Low Porosity: Non-Stationary, Negative Value, and Singularity

Effect of Cell Structure on the Uniaxial Compression Properties of Closed-Cell Foam Materials

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

Effect of Inner Gas Pressure on the Elastoplastic Behavior of Porous Materials: A Second-Order Moment Micromechanics Model

Modeling of Macro-Deformation Behavior of Thin-Walled Aluminum Foam by Gas Injection Method

Numerical simulation on compressive yielding behavior of closed-cell metal foam with low density

Understanding the effect of defects on compressive behaviors of closed-cell foams: Experiment and statistical model

High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams

Dynamic Crushing Behavior of the High-Density Closed-Cell Foams

Numerical Modeling of the Compression Process of Elastic Open-cell Foams