An Enhanced Flame Radiation Burner

M.A. Delichatsios,J. De Ris,L. Orloff

DOI: https://doi.org/10.1016/s0082-0784(06)80127-x

1992-01-01

Abstract:An exploratory methane burner was constructed for increasing the flame radiation output in turbulent diffusion flames from burners and in furnaces. Prior to its combustion as a turbulent diffusion flame in ambient air, methane fuel was preheated to high temperature (up to 1500° K) to facilitate the formation of soot particles which contribute to a significant increase in flame radiation before they burn out completely inside the flames. In some tests, methane was also premixed with pure oxygen (up to 30% of the fuel mass). The exploratory burner was built by using high temperature ceramics while fuel preheating was maintained by electric heaters. The concept and design for this burner was based on recent experiments and modeling of flame radiation in luminous turbulent jet diffusion flames. Radiation measurements in this burner have shown that: a) methane (and presumably natural gas) preheating to temperatures 1273° K or more can produce turbulent diffusion flames having radiant fractions up to 44%; b) oxygen premixing in addition to fuel preheating, up to 30% of the fuel mass flow rate, did not increase the radiant fraction, owing perhaps to soot oxidation as soot is being formed. Although NOx measurements are not available yet from the present burner, related measurements show that NOx yield from the present flames will be much lower than in conventional burners, because effective flame temperatures are less than about 1800° K (i.e. less than in conventional burners ∼2300° K) owing to the significant radiant losses from the present turbulent diffusion flames.