Abstract:Abstract Contour error compensation is an active research topic in five-axis CNC machining, especially in the manufacturing of sculptured surface parts. Nevertheless, current methods are mainly based on the mirror compensation principle, and fail to obtain a desired level of accuracy when processing parts with tight curvature feature. To address this issue, a global toolpath modulation-based contour error pre-compensation method is developed in this paper, which incorporates the error compensation issue into the stage of toolpath planning with a linear analytical solution. In this method, the nominal toolpaths used to machine the products is first expressed by dual B-spline curves, and then the instantaneous tracking error model of each individual drive is built with respect to control points of splined path. Afterward, the satisfaction condition of the spline control points for eliminating the contour error is yielded, which provides a possibility for compensating contour error in a global manner, and the neighbor-dependent coupling issue in error compensation between adjacent cutter location points is capable of being handled as well. On this basis, by applying the least-squares technique, the complicated contour error pre-compensation problem is further converted into a solution of simpler linear equation system. For enhancing its robustness when processing long toolpaths, an adaptive piecewise modulation strategy is also developed. Finally, both experiment and simulation are conducted to validate the proposed method, and the results demonstrate that the proposed method can significantly improve contour precision at low computational costs when compared with the existing pre-compensation method.

A Global Cutter Positioning Method for Multi-Axis Machining of Sculptured Surfaces

An accurate surface error optimization for five-axis machining of freeform surfaces

A Tool Positioning Algorithm Through Longitude Separation Approach for a Cutter with Non-circle Generatrix

Research on a Novel Approach to Multi-Axis Line Contact Milling

Global Tool Interference Detection in Five-Axis Machining of Sculptured Surfaces

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

The Cutter Envelope Surface Calculation of Multi-Axis NC Machining

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Global Uncut Regions Removal for Efficient Contour-Parallel Milling

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

CUTTING EDGE ERROR IN PRINCIPAL AXIS MATHOD FOR FIVE-AXIS MACHINING OF SCULPTURED SURFACES

Positioning Algorithm of Ringlike Cutter Multi-point Contact Machining

Third-order Point Contact Approach for Five-Axis Sculptured Surface Machining Using Non-Ball-end Tools(ii): Tool Positioning Strategy

Isoscallop of Self-Adaptive Tool Orientation with Toroidal Cutter under Optimum Orientation of MCPs

A High-Accuracy Tool Path Generation (HATPG) Method for 5-Axis Flank Milling of Ruled Surfaces with a Conical Cutter Based on Instantaneous Envelope Surface Modelling

A Global Tool Orientation Optimization Method for Five-axis CNC Machining of Sculptured Surfaces

Global toolpath modulation–based contour error pre-compensation for multi-axis CNC machining

Interference-Free Tool Positioning for Five-Axis Sculptured Surface Machining Using Third-Order Point Contact Approach

An Improved Method for Generating Cutter Points Based on Required Form Accuracy of the Machining Surface

Tool Orientation Optimization Considering Cutter Deflection Error Caused by Cutting Force for Multi-Axis Sculptured Surface Milling

Research on the method of precision evaluation and controlling for the cutter location path in five-axis machining