Abstract:Phenolic foam (PF) displays excellent flame, smoke, and toxicity (FST) properties and good insulation properties. Nevertheless, the friability and inferior mechanical properties of PF have critically restricted its application in many fields. A series of phenolic foam/silica nanocomposites (MPF) with different silica contents were synthesized by in situ polymerization in this study. During the in situ polymerization process, the synthesis of phenolic resin/silica nanocomposites and formation of chemical bonding between the components were generated simultaneously. The reactive principle between silica nanoparticles and prepolymer was investigated using Fourier transform infrared spectroscopy (FTIR), and the results of FTIR indicated existence of the chemical reaction between them. Meanwhile, silica can act as "bridge" to form crosslinked network structure. The mechanical, thermal, and friability properties of MPF nanocomposites were characterized. Moreover, the results of microstructure of pure PF and MPFs indicated that the cell size distributions of MPFs are narrower, the cell distributions of MPFs are more uniform, and the cell wall thickness of MPFs is thicker, compared with pure PF. When the content of silica sol was 2 wt%, the compressive strength, compressive modulus, and tensile strength were increased by a factor of 47.37%, 38.55%, and 57.14% compared with that of pure PF, respectively. Furthermore, all MPF nanocomposites exhibited better thermal stability and lower pulverization ratio than that of pure PF. (C) 2015 Society of Plastics Engineers

Synthesis and properties of novel phenolic resins modified with nanosized copper particles

Study on Phenolic Resins Modified by Copper Nanoparticles

Phenolic Resins Modified by Nanocopper Particles and Their Service Performances

PHENOLIC RESIN MODIFIED BY NANO-COPPER AND ITS APPLIED BEHAVIORS

Novel Silicon-Modified Phenolic Novolac Resins: Non-isothermal Curing Kinetics, and Mechanical and Thermal Properties of Their Biofiber-Reinforced Composites

Effect of Nano-Particle Copper on Properties of Phenolic Resin and Friction Materials

PREPARATION OF PHENOLIC RESIN MODIFIED BY NANO-COPPER USING IN SITU CO-PRODUCING METHOD

Electrical and Rheological Percolation of Polymer Nanocomposites Prepared with Functionalized Copper Nanowires

Enhancing dispersion of copper nanowires in melt-mixed polystyrene composites

Incorporation of In Situ Synthesized Nano-Copper Modified Phenol-Formaldehyde Resin to Improve the Mechanical Properties of Chinese Fir: A Preliminary Study

Effect of elastomeric nanoparticles on properties of phenolic resin

Fabrication of nano-cupric oxide in phenol–formaldehyde resin adhesive: synthesis, curing characteristics, and morphology

Enhanced mechanical properties, thermal stability of phenolic‐formaldehyde foam/silica nanocomposites via in situ polymerization

The simultaneous preparation of nano cupric oxide (CuO) and phenol formaldehyde (PF) resin in one system: aimed to apply as wood adhesives

Strategic moderation of thermal stability and curing time of lignin-based phenolic resin by incorporating nanoparticles

Effects of Surface Grafting of Copper Nanoparticles on the Tensile and Bonding Properties of Flax Fibers

Incorporation of a nano/micro CuO formulation into phenol formaldehyde (PF) resin: Curing kinetics, morphological analysis, and application

Lignin Nanoparticle-Reinforced Phenolic Foams

Effect of Grafted Polytetrafluoroethylene Nanoparticles on the Mechanical and Tribological Performances of Phenol Resin

Modified Phenolic Resin with Aluminium and Rectorite: Structure, Characterization, and Performance

Flame retardancy, thermal decomposition and mechanical properties of epoxy resin modified with copper N, N’-piperazine (bismethylene phosphonate)