Abstract:This article reports the fire resistance experiments conducted on I-section circular steel arches, as well as the observed out-of-plane flexural–torsional buckling (FTB) behavior and in-depth finite element numerical simulation results. The test was carried out using a large fire test furnace to provide a real fire environment with a nonuniform temperature field. A specially designed loading device allowed for unconstrained out-of-plane deformation of the specimens inside the furnace, thereby achieving effective load conditions and noncoupled response of the components. Numerical analyses were performed using a combination of the general codes Fluent and Abaqus, with the former used for heat transfer analyses, and a structural FE model including the loading device and complex geometric imperfections was established based on the measured data. Thus, accurate simulation of the out-of-plane behavior of the steel arches at elevated temperature was achieved. On this basis, an in-depth parametric study was carried out to investigate the effects of temperature field variations, load ratio (LR), and geometric imperfection. The analysis results show that FTB occurs at nonuniform temperatures for the arches under concentrated load, and the difference in temperature distribution in fire has a minimal effect on the FTB behavior. LR is negatively correlated with critical temperature; the smaller the LR, the more significant the weakening of critical loads by fire. The effect of initial geometrical imperfections on FTB at elevated temperatures is similar to that at ambient temperatures, and the effect on the critical temperature of FTB can almost be ignored when the imperfection amplitude is less than S/400.

Effects of Temperature Subsection on Numerical Simulation of Steel Structure Response under Non-uniform Temperature Distribution

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Effect of Non-Uniform Longitudinal and Transverse Temperature Distributions on Maximum Deflection of a Fixed Supported Steel Beam

Finite Element Analysis of Fire Behavior of Steel Beam under Different Elevated Temperature Conditions

Effects of Longitudinally Non-Uniform Temperature Distribution on Steel Beams under Fire Conditions

Numerical Simulation Analysis on Temperature Field for Large-space Structures under Fire

Numerical Study on Temperature Distribution of Structural Components Exposed to Travelling Fire

Effects of non-uniform fire protection coating on temperature distribution and deformation of a simply supported steel beam under fire conditions

Examination of the Behavior of Double Cold-Formed Steel Columns with Σ-Shaped Sections Subjected to Non-Uniform Temperature Conditions

Numerical investigations of fire-resistant steel welded I-section columns under elevated temperatures

Experimental and numerical investigation on mechanical behavior of Q355 steel and connections in fire conditions

Temperature Numerical Analysis of A Large Rigid-Continuous Concrete Bridge

Analysis of Design Load of Fire-Resistant Steel Beams under High Temperature Fire

ANALYSIS OF THE TEMPERATURE FIELD OF STEEL MEMBERS IN SUNSHINE

CONSTITUTIVE MODEL FOR FINITE ELEMENT ANALYSIS OF STEEL ELEMENTS WITH BUCKLING CONSIDERED AT HIGH TEMPERATURES

Coupling Thermal and Mechanical Effect on Structural Fire Safety

STABILITY LIMIT STATE ANALYSIS OF STEEL STRUCTURAL MEMBER UNDER FIRE

Temperature Field Analysis of SRC-Column to SRC-Beam Joints Subjected to Simulated Fire including Cooling Phase

Study on Temperature Distribution Calculation Methods for Steel Roofs of Large-space Structures under Fire Conditions

Flexural–torsional buckling of steel circular arches with I-section under central concentrated load in elevated-temperature environment

Software Integration of Safety Analysis of Reinforced Concrete Structure Considering Temperature During Construction