Abstract:In fire events, to utilize catenary effect and accommodate large deformation in beams demands a sufficient deformation capacity and ductility in steel bolted connections, which is not well considered in design practice. Therefore, for performance-based fire safety design, it becomes very essential to accurately predict the fracture behavior of steel bolted connections at elevated temperatures. However, experimentally predicting their fracture behavior is very costly at elevated temperatures and limited by the scale of structural components. Therefore, this paper proposes a numerical analysis approach and investigates the fracture behavior of high-strength bolted steel connections at elevated temperatures based on the validated numerical analysis approach. The temperature-dependent material properties including true stress-strain curves and fracture parameters in a three-stage fracture model (describing the pure tension, pure shear, and combined tension and shear fracture behavior) for high-strength ASTM A325 bolt and A572 Grade 50 steel are firstly calibrated from and validated against their tensile and shear test results. They are further validated against the test results on single-bolted and multi-bolted connections at elevated temperatures, which were not used in the calibration of these material properties. The validated material properties and fracture parameters are finally proposed for fracture prediction of different types of bolted connections under various loading conditions at elevated temperatures. This study shows the potential of reasonable prediction of the fracture behavior for the steel bolted connections at elevated temperatures and under complicated loading conditions using a numerical analysis approach. According to the numerical analysis results, the degradation of shear fracture resistance of A325 bolts at elevated temperatures is more significant than that of A572 Grade 50 steel plate, which may lead to a bolt shear failure mode for these connections with a large end distance at high temperatures (>400 °C). It is also found that the fracture failure mode can significantly influence the degradation of the load and deformation capacities of high-strength steel bolted connections at elevated temperatures. With the bolt shear failure mode, the degradation of load and deformation capacities of steel bolted connections are more significant than that with plate tearing-out failure mode.

Numerical Design Calculation of T-stubs at Elevated Temperatures

Modeling of Steel Bolted T-Stub Connection under Large Deformation Condition

Design of high strength steel columns at elevated temperatures

Numerical Analysis for Behavior of Stainless-Steel Web Cleat Connections at Elevated Temperatures

Behaviour of Cold-Formed Stainless Steel Beams at Elevated Temperatures

Extension of the Continuous Strength Method to the design of steel I-sections in fire

Design of Cold-Formed Stainless Steel RHS and SHS Beam–columns at Elevated Temperatures

Fracture behavior of high-strength bolted steel connections at elevated temperatures

T-STUB COMPONENT BEHAVIOR OF THE BEAM TO COLUMN BOLTED FLANGE CONNECTION BASED ON A NUMERICAL ANALYSIS AND EN 1993-1-8 DESIGN CODES

Behavior of High Strength Structural Steel at Elevated Temperatures

Cold-formed steel lipped channel columns at elevated temperatures

Finite Element Analysis of Cold-Formed Stainless Steel Tubular T-Joints at Elevated Temperatures

Numerical assessment of T-stub component subjected to impact loading

Simplified Calculation Methods of Connections to Concrete-Filled Steel Tubular Columns at Elevated Temperatures

Fire resistance behavior of T-stub joint components under transient heat transfer conditions

BEHAVIOUR OF HIGH STRENGTH COLD-FORMED STEEL COLUMNS UNDER ELEVATED TEMPERATURES

Corner Properties Of Cold-Formed Steel Sections At Elevated Temperatures

MODELLING OF FLEXIBLE END PLATE CONNECTIONS IN FIRE USING COHESIVE ELEMENTS

Concrete Filled Steel Tube Stub Columns under Combined Temperature and Loading

A Numerical Investigation of High-Strength Steel H-SA700 of Protected Beam with Cavity Under Elevated Temperature Including Creep Behavior

Finite Element Analysis Of Temperatures In Concrete Filled Double Skin Steel Tubes Exposed To Fires