Abstract:A prediction model of the welding process of Ti-6Al-4V titanium alloy was established by using the finite element method, which was used to evaluate the phase composition, residual stress and deformation of the welded joints of Ti-6Al-4V sheets with different processes (including tungsten inert gas welding, TIG, and laser beam welding, LBW). The Ti-6Al-4V structures of TIG welding and LBW are widely used in marine engineering. In order to quantitatively study the effects of different welding processes (including TIG welding and LBW) on the microstructure evolution, macro residual stress and deformation of Ti6Al4V titanium alloy sheets during welding, a unified prediction model considering solid-state phase transformation was established based on the ABAQUS subroutine. In this paper, LBW and TIG welding experiments of 1.6 mm thick Ti-6Al-4V titanium alloy sheets were designed. The microstructure distribution of the welded joints observed in the experiment was consistent with the phase composition predicted by the model, and the hardness measurement experiment could also verify the phase composition and proportion. From the residual stress measured by experiment and the residual stress and deformation calculated by finite element simulation of LBW and TIG weldments, it is concluded that the effect of phase transformation on residual stress is mainly in the weld area, which has an effect on the distribution of tensile and compressive stress in the weld area. The overall deformation of the welded joint is mainly related to the welding process, and the phase transformation only affects the local volume change of the weld seam. Importantly, the phase composition and residual stress, which are scalar fields, calculated by the established model can be introduced into the numerical analysis of structural fracture failure as input influence factors.

Superplasticity of Ti-6Al-4V Butt-welding Plate by High Energy Beam Welding

Superplastic Bulging Capability of Ti-6Al-4V Butt-Welded Plate by High Energy Beam Welding

Superplastic Formability of Ti-6Al-4V Butt-Welded Plate by Laser Beam Welding

A Comparative Study of Pulsed Nd:YAG Laser Welding and TIG Welding of Thin Ti6Al4V Titanium Alloy Plate

Micro-crystallographically revealing the plasticity-evolved behaviors of thick Ti–6Al–4V laser-arc hybrid welded joint

Effect of keyhole on plasticity-evolved behaviors of thick Ti–6Al–4V laser-arc hybrid welded joint

Microstructure Evolution and Mechanical Properties of Wrought/wire Arc Additive Manufactured Ti-6Al-4V Joints by Electron Beam Welding

Study on Laser Beam Welding/superplastic Forming Technology of Multi-Sheet Cylinder Sandwich Structure for Inconel718 Superalloy with Ultra-Fine Grains

Microstructure, Variant Selection, and Mechanical Properties of Laser-Welded Ti-4Al-2V Joints

Micromechanical testing and microstructure analysis of as-welded and post-weld heat-treated Ti-6Al-4V alloy

Microstructure and Mechanical Properties of Ti-6Al-4V Welds Produced with Different Processes

Comparative study on superplastic tensile behaviors of the as-extruded Ti6Al4V alloys and TiBw/Ti6Al4V composites with tailored architecture

Effects of Weld Cross-Section Profiles and Microstructure on Properties of Pulsed Nd:Yag Laser Welding of Ti6al4v Sheet

Effect of Heat Distribution on Microstructure and Mechanical Properties of Electron Beam Welded Dissimilar TiAl/TC4 Joint

A Numerical Simulation Method Considering Solid Phase Transformation and the Experimental Verification of Ti6Al4V Titanium Alloy Sheet Welding Processes

Effect of Heat Input on the Microstructures and Mechanical Properties of Laser Welded Ti2AlNb Alloys

Microstructure evolution and fracture behaviour for electron beam welding of Ti-6Al-4V

Mechanism of enhanced ductility of Ti–6Al–4V alloy components deposited by pulsed plasma arc additive manufacturing with gradient-changed heat inputs

Analysis on welded joint of thick Ti-6Al-4V plate by magnetically controlled narrow-gap TIG welding

Multi-Pass Butt Welding of Thick TA5 Titanium-Alloy Plates by MIG: Microstructure and Properties

Fundamental research of welding plastic strain evolution process: Characteristics and law of evolution process of welding plastic strain in mild steel, stainless steel and titanium alloy thin plate