Abstract:A crack-free high-Mn TWIP steel welding joint with comparable strength and superplastic was obtained via vacuum electron beam welding (VEBW) where the microstructural evolution, mechanical behaviors and strengthening mechanism of welding joint were investigated. The results indicated that the welding joint with a typical nail-shaped welding cross-section was divided into three zones including the base metal (BM), heat-affected zone (HAZ) and fusion zone (FZ). Massive fine AlN-type precipitates with the hexagonal crystal structure were observed in welding join. The orientation relationship between the γ-austenite matrix and AlN precipitates was determined as [001] γ //[2110] AlN . In FZ, small-sized cellular grains or columnar grains with consistent growth directions were combined into large-sized columnar grains with obvious preferential orientation. Compared with the base mantal, the yield strength, ultimate strength and elongation of the VEBWed specimen were slightly reduced by 6.03%, 4.7% and 13.23%, respectively. However, the impact toughness was obviously decreased from the 87.90 J–68.97 J after the VEBW process, which was mainly attributed to the brittle AlN precipitates, inhomogeneous microstructure and back stress induced by the plastic mismatch between gradient grains. The strength contributions of different regions to overall strength including of BM, HAZ and FZ in welding joint were calculated. Here, the dislocation strengthening and precipitation strengthening were the dominant strengthening mechanisms of FZ, which was attributed to the high level of density and massive fine AlN precipitates induced by micro-elements segregations during the VEBW process.

Superplastic Bulging Capability of Ti-6Al-4V Butt-Welded Plate by High Energy Beam Welding

Superplasticity of Ti-6Al-4V Butt-welding Plate by High Energy Beam Welding

Superplastic Formability of Ti-6Al-4V Butt-Welded Plate by Laser Beam Welding

Micro-crystallographically revealing the plasticity-evolved behaviors of thick Ti–6Al–4V laser-arc hybrid welded joint

Electron Beam Welding and Post Heat Treatment of a New Near-Beta High-Strength Ti-4Al-5Mo-5V-5Cr-1Nb Alloy

Study on Laser Beam Welding/superplastic Forming Technology of Multi-Sheet Cylinder Sandwich Structure for Inconel718 Superalloy with Ultra-Fine Grains

A Comparative Study of Pulsed Nd:YAG Laser Welding and TIG Welding of Thin Ti6Al4V Titanium Alloy Plate

Microstructure Evolution and Mechanical Properties of Wrought/wire Arc Additive Manufactured Ti-6Al-4V Joints by Electron Beam Welding

Gas Tungsten arc welding of Ti-6Al-4V sheet for pressure vessels used in aerospace application: A detailed characterization of weldment

Mechanism of enhanced ductility of Ti–6Al–4V alloy components deposited by pulsed plasma arc additive manufacturing with gradient-changed heat inputs

Micromechanical testing and microstructure analysis of as-welded and post-weld heat-treated Ti-6Al-4V alloy

Microstructure evolution and fracture behaviour for electron beam welding of Ti-6Al-4V

Microstructure and mechanical properties of HSLA thick plates welded by novel double-sided gas metal arc welding

Deformation and Spallation of Explosive Welded Steels under Gas Gun Shock Loading

Fracture behavior and mechanism of Ti-6Al-4V electron beam welded joint

Microstructure, Variant Selection, and Mechanical Properties of Laser-Welded Ti-4Al-2V Joints

Effect of keyhole on plasticity-evolved behaviors of thick Ti–6Al–4V laser-arc hybrid welded joint

Interlaminar Microstructure and Mechanical Properties of Narrow Gap Laser Welding of 40-Mm-thick Ti-6Al-4V Alloy

Effects of Weld Cross-Section Profiles and Microstructure on Properties of Pulsed Nd:Yag Laser Welding of Ti6al4v Sheet

Microstructure Evolution And Fracture Behaviour For Electron Beam Welding Of Ti-W-4v

Achieving superplastic TWIP steel welded joint via vacuum electron beam welding