Abstract:The main goal of this paper is the modeling, numerical simulation, and experimental validation of the anisotropic ductile damage effects on initially anisotropic plastic flow with mixed (isotropic and kinematic) nonlinear hardening under large plastic strains for metal forming processes simulation. A symmetric second-rank damage tensor together with a symmetrized fourth-rank damage-effect tensor is used to describe the anisotropic ductile damage evolution and its effect on the large plastic flow with hardening. Following the concept of effective state variables in the framework of the total energy equivalence assumption, the “Murakami” fourth-rank damage-effect tensor is chosen to describe the anisotropic damage effect on the elastic-plastic behavior including the mixed hardening. The “Lemaitre” ductile anisotropic damage evolution relationships, where the principal directions of the damage rate tensor are governed by those of the plastic strain rate tensor, are used. As difference with the works cited above, the nonlinear mixed isotropic and kinematic hardening is taken into account considering the full and strong damage effects through the effective state variables deduced from the total energy equivalence assumption initially proposed by Saanouni et al. The non-associative plasticity theory is considered, and the “ Hill 1948 ” quadratic (equivalent) stress norm is used to describe the large plastic anisotropic flow accounting for mixed isotropic and kinematic hardening with anisotropic damage effects. The formulation is performed assuming finite plastic strains and small elastic strains through the so-called rotated frame formulation. The obtained model was implemented into ABAQUS/Explicit® FE software thanks to the user’s developed subroutine VUMAT. The numerical aspects related to the time discretization of the fully coupled anisotropic constitutive equations are carefully described. Finally and for the validation purpose, the model is identified using an appropriate experimental data base concerning the grade 316L stainless steel to simulate numerically some metal forming processes.

Effects of symmetrisation of net-stress tensor in anisotropic damage models

Effect of Hysteretic Constitutive Models on Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridges

Basis of Anisotropic Damage Mechanics

Anisotropic Dynamic Damage and Fragmentation of Rock Materials under Explosive Loading

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Anisotropic ductile damage fully coupled with anisotropic plastic flow: Modeling, experimental validation, and application to metal forming simulation

Isotropic Elasto-Plastic Damage Mechanics

An anisotropic, brittle damage model for finite strains with a generic damage tensor regularization

A constitutive model coupling damage and material anisotropy for wide stress triaxiality

Basis of Isotropic Damage Mechanics

A Thermodynamically Consistent Anisotropic Continuum Damage Mechanics Model With Damage-Dependent Equivalent Strain

On the Structure of Anisotropic Damage Yield Criteria

Reconsideration on the Elastic Damage/degradation Theory for the Modeling of Microcrack Closure-Reopening (MCR) Effects

Anisotropic damage in brittle materials and its experimental measurement method

A Unified Invariant Description of Micromechanically-Based Effective Elastic Properties for Two-Dimensional Damaged Solids

Multi-stress damage and healing mechanics in quasi-brittle materials: Theoretical overview

Stress Triaxiality in Anisotropic Metal Sheets—Definition and Experimental Acquisition for Numerical Damage Prediction

A Statistical Anisotropic Damage Constitutive Model for Shale Including the Effects of Confining Pressure and Strain Rate

A New Anisotropic Damage Model for Ceramic Matrix Composites

A physically-based damage model for soft elastomeric materials with anisotropic Mullins effect

An anisotropic damage model combined with a tracking algorithm for modelling crack propagation