Abstract:With the development of voltage level and capacity in recent years, the impact of external short circuit has a growing threat to the stability of transformer windings than ever before. Because of the weakness of anti-short-circuit capacity, around 40% of the transformer faults are caused by the huge impact of short circuit every year. In view of this, it is of great significance to study the mechanical behavior of transformer winding structures during external short-circuit faults. This paper represents investigations of short-circuit current, the transient leakage magnetic field, electromagnetic forces and the von Mises stress of a real full-scale 500kV single-phase two windings transformer during the external short-circuit transient process. The worst case of short-circuit fault with three-phase short-circuit happening simultaneously has been simulated. A circuit model has been built up to get the short-circuit current. The 3D geometric model has been established based on real size parameters of the DFP334000/500kV single-phase two windings oil-immersed power transformer. The 3D finite-element method (FEM) has been employed to calculate the leakage magnetic fields excited by the short-circuit current. Henceforth, the electromagnetic forces acting on windings have been obtained and analyzed according to the short-circuit current and magnetic fields calculation results, and both axial and radial dynamical responses are considered and analyzed. The mechanical characteristics of the winding disks and the insulation structures have been calculated in this paper. The von Mises stress is the crucial factor to determine whether or not the transformer windings can withstand the impact of external short-circuit current, and its distribution has been simulated and analyzed.

Three-Dimensional Simulation of the Magnetic Field and Leakage Magnetic Field in Switching Mode Power Supply Transformer

Thermal Simulation of Switching Mode Power Supply Transformer With ANSYS

Research on Transient Electric Field Distribution of High-Frequency Transformers Based on COMSOL and SIMULINK Co-simulation

3D Electric Field Simulation of Converter Transformer with Real Insulation Materials Utilized in HVDC Systems

Calculation of Magnetic Flux Leakage and Loss of 220kv Transformer Based on MAGNET Field-Circuit Coupling

Distribution Characteristics of Three-Dimensional Leakage Magnetic Field at the Transposition Structure of Transformer Winding

Dynamic Electromagnetic Force Analysis of a Power Transformer with Regulated Windings

Modeling And Simulation Of Magnetizing Inrush Current Of Large Power Transformers

Magnetic Flux Leakage Simulation and Analysis of Permanent Magnet DC Motors Based on Magnet

Quasi-3-D Nonlinear Analytical Modeling of Magnetic Field in Axial-Flux Switched Reluctance Motors

Three-dimensional Finite Element Analysis of Electric Fields at Winding Ends of Dry-Type Transformer

Numerical Analysis On Magnetic Field Of Hts Transformer With Different Geometry

Study on Finite Element Method Applied in Winding Deformation Monitoring for Calculating the Leakage Inductance of Power Transformer

Temperature Field Simulation Research on the Leakage Inductance Transformer

Magnetic Flux Leakage, Eddy Current Loss and Temperature Distribution for Large Scale Winding in UHVDC Converter Transformer Based on Equivalent 2D Axisymmetric Model

Analysis on the Flux Leakage Distribution by the 3D FEM Simulation Method under the Different Local and Minor Transformer Winding Defects

Simulation of Internal Fault of Three-Phase Five-Leg Transformer

A FEM-based simulation of electromagnetic forces on transformer windings under short-circuit

Leakage Inductance of Power Transformer in High Frequency Switch Mode Power Supply

Simulation of Transformer Windings Mechanical Characteristics During the External Short-Circuit Fault

Design and Application of State Simulation System for Power Transformer