Abstract:A novel composite anode material consisted of electrodeposited Sn dispersing in a conductive micro-porous carbon membrane, which was directly coated on Cu current collector, was investigated. The composite material was prepared by: (1) casting a polyacrylonitrile (PAN)/dimethylformamide (DMF) solution that contained silica particles on a copper foil, (2) removing the solvent by evaporation, (3) dissolving the silica particles by immersing the copper foil into an alkaline solution, (4) drying the copper foil coated by micro-porous membrane, (5) electrodepositing Sn onto the copper foil through the micro-pores in the micro-porous membrane, and (6) annealing as-obtained composite material. This method provided the composite material with high decentralization of Sn and supporting medium purpose of conductive carbon membrane deriving from pyrolysis of PAN. SEM, XRD and EDS analysis confirmed this structure. The characteristic structure was beneficial to inhibit the aggregation between Sn micro-particles, to relax the volume expansion during cycling, and to improve the cycleability of electrode. Galvanostatic tests indicated the discharge capacity of the composite material remained over 550 mAh g−1 and 71.4% of charge retention after 30 cycles, while that of the electrode prepared by electrodepositing Sn on a bare Cu foil decreased seriously to 82.5 mAh g−1 and 13%. These results show that the composite material is a promising anode material with larger specific capacity and long cycle life for lithium ion batteries.

Electrodeposition of Sn–Cu Alloy Anodes for Lithium Batteries

Characteristics Research of Electrodeposited Sn-Cu Alloy Anode for Lithium Ion Battery

One-step Electrodeposition Synthesis and Electrochemical Properties of Cu 6 Sn 5 Alloy Anodes for Lithium-Ion Batteries

Synthesis and surface modification of tin-copper alloy anode for lithium ion battery by electrodeposition process

Electrochemical synthesis of SnCo alloy shells on orderly rod-shaped Cu current collectors as anode materials for lithium-ion batteries with enhanced performance

Research on SnCu alloy anode for Li-ion batteries

Microstructure and Electrochemical Properties of Electron-Beam Deposited Sn–Cu Thin Film Anodes for Thin Film Lithium Ion Batteries

Electroless Cu-plated Ni3Sn4 alloy used as anode material for lithium ion battery

Improved Electrochemical Performance of Cu-Sn/nano-SiO2 Composite Anode Materials for Lithium-Ion Batteries Fabricated by Controlled Electrodeposition

Advanced Structures in Electrodeposited Tin Base Anodes for Lithium Ion Batteries

Cyclic Durable High-Capacity Sn/Cu6Sn5 Composite Thin Film Anodes for Lithium Ion Batteries Prepared by Electron-Beam Evaporation Deposition

Preparation and property of nanometer Cu-Sn alloy anode material for lithium-ion batteries

Guided lithium nucleation and growth on lithiophilic tin-decorated copper substrate

Preparation and Electrochemical Properties of Nano-sized Co-Sn Alloy Anode for Lithium Ion Batteries

Fabrication of Sn-Ni Alloy Film Anode for Li-ion Batteries by Electrochemical Deposition

Preparation and performance of a three-dimensional porous copper-tin electrode for lithium-ion batteries

Hydrothermal synthesis and electrochemical properties of nano-sized Co–Sn alloy anodes for lithium ion batteries

Non-aqueous Electrodeposition of Porous Tin-Based Film As an Anode for Lithium-Ion Battery

Nano-Sized Snsbcux Alloy Anodes Prepared by Co-Precipitation for Li-Ion Batteries

Three-dimensional Porous Cu6Sn5 Alloy Anodes for Lithium-ion Batteries

Realizing Ultrathin LiSn Alloy Anode by Tuning the Wettability of Molten Li for High-Energy-Density Batteries