Research on oil recovery of oily sludge by subcritical/supercritical hydrothermal upgrading
Yuanwang Duan,Shuzhong Wang,Chao He,Fan Zhang,Yulong Wang,Yanhui Li
DOI: https://doi.org/10.1002/jctb.7642
IF: 3.709
2024-03-21
Journal of Chemical Technology & Biotechnology
Abstract:Background Sub/supercritical hydrothermal treatment is a promising technology for efficient resource utilization and complete harmlessness of oily sludge, which is significant for promoting the green and sustainable development of the petroleum industry. In this paper, the effects of reaction temperature, reaction pressure, reaction time, and oil content on oil recovery and oil quality (Composition, desulfurization and denitrification, and heavy metal content) are studied in detail. Results It is found that the temperature is the most critical parameter, and the optimal process condition is 350 °C, 20 MPa, 60 min, and 12 wt% oil content, under which the oil recovery rate can reach 70.46%. The content of N and S in the recovered oil can be as low as 0.87 wt% and 0.536 wt%, and the ratio of H/C is higher than 1.6. Conclusion It was found that reaction temperature had the most significant effect on oil recovery compared with other reaction parameters. Heavy metals are transferred from the oil phase to the water and solid phases, so the content of heavy metals in the oil phase is up to standard. The experiment shows that supercritical water heat treatment of oily sludge is feasible, which made the commercial application of sub/supercritical water thermal oil collection technology possible. This article is protected by copyright. All rights reserved.
engineering, chemical,biotechnology & applied microbiology, environmental,chemistry, multidisciplinary