Manufacture of Workmanship Facility for Laser Cutting Tube

WANG Binxiu,TENG Jie

DOI: https://doi.org/10.3969/j.issn.1001-3881.2011.02.003

2011-01-01

Abstract:It about analyzing workmanship facility of domestic laser cutting flat-panel,points out the shortcomings and designs a new type of cutting workmanship facility. The new workmanship facility can disassemble so that it increases using efficiency greatly.

What problem does this paper attempt to address?

Application and prospect of laser manufacture technology

Xin Chenguang

DOI: https://doi.org/10.3969/j.issn.1671-3133.2012.09.032

2012-01-01

Abstract:Laser manufacturing technology is a kind of green manufacturing technology which is full of potential for development of high flexibility.Describes applications of laser technology in different areas,different manufacturing process including laser welding,laser cladding and laser surface alloying,laser quenching,laser surface modification,laser cutting,laser rapid forming,laser drilling,laser nanometer manufacturing,and prospects the research and development tend of laser manufacturing technology.
Study and Development of Automatic Control System for Chamfering Machine Based on PLC

WU Yan-ming,WU Bin,ZANG Fu-hai,ZHU Jia-cheng,WU Tian-xing

DOI: https://doi.org/10.3969/j.issn.1001-2265.2011.12.017

2011-01-01

Abstract:Influenced by scaling?off cutting, to the mass produced rods and steel tube blank, the phenomena of burr and flashing are found. If the parts are processed by manual chamfering and lathe, it is tremendously labor intensive and low efficiency. To solve the problem, an efficient double?headed automatic chamfering machine was designed based on PLC control. The structural components of the chamfering machine were introduced , the gas?liquid control diagram and the electric control schematic figure including the flow chart of software programming were described in detail. The practices have proven productivity and end quality are improved greatly be?cause the chamfering machine can be used to realize double end continuous processing although loading once.
A Programming Cutting System To Enhance Productivity With Individualitiesnn

Cheng Yao,Ye Tao,Ting Zhang,Guanyun Wang,Fangtian Ying

DOI: https://doi.org/10.1007/978-3-319-58697-7_42

2017-01-01

Abstract:As an alternative to traditional laser cutting, we present LaserLeast, a fabrication-oriented design system that produce 3D objects using a laser cutter to bridge the gaps in prototyping from software to hardware and further evoke energy-and resource-saving consciousness in rapid manufacturing context. The key idea behind our system is that it employs a line-based strategy to improve the original workflow at the 2D output arrangement stage by using two shapes sharing one cutting line, and create a line-based workflow without a 3D modeling stage using three customizable components (line shape, 2.5D technique, and assemble plug). We compare LaserLeast with the traditional strategy with two use cases to address the advantages and limitations and show that LaserLeast has the potential to stimulate the creativity of product designers and the human computer interaction community to enhance productivity in both design and laser cutting through the Internet.
Worn area modeling for automating the repair of turbine blades

Jianming Zheng,Zhongguo Li,Xi Chen

DOI: https://doi.org/10.1007/s00170-003-1990-6

IF: 3.563

2006-01-01

The International Journal of Advanced Manufacturing Technology

Abstract:The current repair process for worn-out turbine blades and blisks is very manual, and experience based and hence is error-prone. It requires sophisticated CNC-driven (Computer Numerical Control) laser equipment to replace manual welding for the repair. This paper presents an innovative strategy that can lead to the automation of laser welding and cladding. The project makes use of reverse engineering techniques to capture the geometric shape of the worn area by digitized point cloud and nominal geometry. The core software technologies include four aspects: (i) point-to-surface-best-fitting technology that puts the point cloud coordinate system nominal CAD (Computer Aided Design) coordinate system, (ii) a procedure to extract a worn boundary that automatically separates the worn area and the undamaged area, (iii) geometric model representation for the worn area, and (iv) generation of an STL file to drive the CNC laser machine. The tool has been implemented using UG API (Unigraphics Application Programming Interface). Some experimental results have shown that the presented strategy is efficient for repair automation.
Optical system of the ten-tube parallel CO2 laser welder

Yousheng Li,Fuxing Wang,Bing Hu,Binbo Liu

1997-01-01

Abstract:The features and design thinking of the optical system of ten-tube parallel CO2 laser welder are discussed. The optical focusing system, the TV monitoring system and the inside illuminating system are analyzed and calculated, and the design parameters are given. Good welding results have been achieved.
Femtosecond laser workstation and micro-scale machining

Qingliang Zhao,Tao Jiang,Zhiwei Dong,Rongwei Fan,Xin Yu

DOI: https://doi.org/10.1049/cp.2010.1306

2010-01-01

Abstract:Much attention has been paid to femtosecond laser micro-scale machining for its unique advantages in recent years, given the possibilities for processing materials in the absence of thermal damage, and the minimum dimensions that can be machined. In this article a femtosecond laser micromachining workstation is described and a new micro-scale modification system is designed and established. The development of a workstation applying a femtosecond laser source to enable controllable micro-machining, which consists of light source, mechanical and optical components, three dimension (3D) work platform, and control system. Mechanical and optical components are designed for laser beam focusing. Computer software and control system resolves the graphics and to drive the 3D work platform, respectively. With the designed system, percussion, parallel and grid fabricating methods are used to machine different micro-scale structures on stainless steel surface. Besides, the material's removal mechanisms and machining parameters are also investigated.
The Technology and Development of Laser Assisted Machining

WU Xue-feng,WANG Yang

DOI: https://doi.org/10.3969/j.issn.1007-2683.2012.04.007

2012-01-01

Abstract:Laser assisted machining(LAM) which uses laser to elevate the cutting zone temperature has the advantages of decreasing cutting force,improving machining characteristics and increasing tool life productivity.The technical characteristics,processing method and machining mechanism of LAM are depicted in the paper.The latest development of LAM is summarized from two sides of simulation and experiments,as well as the tendency of developing.
Application of Fiber Laser On-the-fly Welding in Manufacture of Seat Frame

CAI Xiaolei,TANG Xinhua

DOI: https://doi.org/10.3969/j.issn.1001-3814.2012.09.068

2012-01-01

Abstract:The application of fiber laser on-the-fly welding technology on Gamma seat frame was studied.The product processing route was determined by the features of seat frame's structure,and the system's selection and integration,the design of fixture and improvement,the programming of the system and the control of the route were explored.The results show that the welding system can fully satisfy the mass production requirements of the product,and has obvious advantages on the welding quality,production efficiency and cost.
Laser Direct Manufacturing Specific Geometry W/Ni Component

ML Zhong,GQ Ning,L Yang,WJ Liu,YX Chen

DOI: https://doi.org/10.2351/1.5059925

2001-01-01

Abstract:Laser direct manufacturing (LDM) is intensively developed in recent years to directly and flexibly manufacture metallic components with full metal density, functions and properties, especially for some specific materials or geometry. This paper presents a project work on laser direct manufacturing a novel designed collimation component for out-space hard X-ray modulation telescope. The research work contained the characteristics of overlap multi-pass laser cladding of tungsten or tungsten nickel alloys, the microstructure analyses, the technique stability of laser direct manufacturing, and the final direct manufacturing of tungsten nickel collimation component. The results proved that laser direct manufacturing could be well used to manufacture specific material and geometry component with good quality, which are very difficult or even impossible by conventional manufacturing methods.
Present situation and future trend of laser welding technique

Lu Binfeng,Lu Fenggui,Tang Xinhua,Yao Shun

DOI: https://doi.org/10.3969/j.issn.1001-1382.2008.04.015

2008-01-01

Abstract:Laser welding has many advantages which compared with traditional welding methods.It has been widely used in industries to join a variety of materials.To look back the development of laser welding technology and look forward to the future trend of laser welding technology,CO2 and Nd:YAG laser equipment and new solid state laser equipment is introduced.The mechanism of laser welding process is also clarified.The emphasis is focused on the characteristics of laser welding process and its problems to be solved.The heavy laser welding platform and dual beam laser welding is introduced.The laser welding of polymer is clarified.The advantages and disadvantages of laser welding are concluded.
Process and Development of Laser Forming

CHEN Dun-jun,XIANG Yi-bin,WU Shi-chun,LI Miao-quan

DOI: https://doi.org/10.3969/j.issn.1001-3814.2000.03.022

2000-01-01

Abstract:Process characteristics and four differenttypes of methods which include sheet bending towards the laser beam,sheet bending away from the laser beam,rod bending and space deformation are introduced.The different forming mechanisms and possible applying fields are stated.The development prospect of laser forming is forecast.
Vacuum laser welding equipment and method

Binggang Zhang,Ting Wang,Jicai Feng,Guoqing Chen

2012-01-01

Abstract:The invention provides vacuum laser welding equipment and method and belongs to the technical field of welding. The equipment and method provided by the invention are used for solving the problems of inconvenience for realization of flexible processing and energy loss in a welding technology. The equipment is characterized in that a workbench is arranged on the bottom plate of a vacuum capsule; a triaxial linkage system is arranged on the inner side wall of the vacuum capsule; a laser head is arranged on the triaxial linkage system; vacuum pumping system is arranged on the outer side wall of the vacuum capsule; the laser head is connected with a laser generator through an optical fiber; the laser head is connected with a numerical control device through a cable; and a water-cooling machine is used for cooling the laser head. The method comprises the following steps: moving the workbench out of the capsule, arranging a workpiece to be welded on the workbench, then moving the workbench into the capsule and closing the door of the capsule; starting up the vacuum pumping system, starting up the laser generator, the numerical control device and the water-cooling machine when the vacuum degree in the capsule reaches the vacuum degree required by the workpiece, and welding; and after welding is finished, injecting air into the capsule, opening the door of the capsule after the air pressure in the capsule reaches the atmospheric pressure, and taking out the workpiece. The equipment and method provided by the invention are used for welding the workpiece.
Web based digitized tele-manufacturing service system of laser cutting

HX Liu,X Wang,CY Gao,JH Liang,XF Zhu,L Cai

2003-01-01

Abstract:Firstly, the architecture of Web-based digitized tele-manufacturing service system of laser cutting is presented in the paper. Secondly, the four main functions and the ideologies of the system are expounded in detail, which are the technological supply service for allies, the on-line commercial service for customers, the functions of system management, the general commercial information service. Finally, the key technology of digitized tele-manufacturing service system and the realization methods as well as the systematic configuration are emphasized.
Recent Progress in Laser Peen Forming of Large Scale Panel

Zonghao HU,Mingsheng LUO,Yongxiang HU,Zhenqiang YAO

DOI: https://doi.org/10.16080/j.issn1671-833x.2017.20.043

2017-01-01

Abstract:Laser peen forming (LPF) for large panel is a kind of deformation technology by inducing nonuniform plastic strain on surface using the laser-induced shock wave.The depth of plastic strain of LPF is five to ten times of the traditional shot peening,hence it can be applied for the manufacture of large panel with high ribs and complex geometry.This paper presents a recent progress of LPF from following aspect:the mechanism of bending deformation of LPF,the shape controlling of LPF for complex geometry and the apparatuses developed for LPF.The background and research status quo are summarized,and the advises are given for the research of LPF.The most important for LPF of large panel is acquainting the bending mechanism and the process optimization and developing apparatus for LPF.
Laser Direct Manufacturing of Tungsten Nickel Collimation Component

ML Zhong,WJ Liu,GQ Ning,L Yang,YX Chen

DOI: https://doi.org/10.1016/j.jmatprotec.2003.12.009

IF: 6.3

2004-01-01

Journal of Materials Processing Technology

Abstract:Laser direct manufacturing (LDM) has been intensively developed in recent years to directly and flexibly manufacture metallic components with full metal density, functions and properties, especially for some specific materials or geometry. This paper presents a project work on laser direct manufacturing a novel designed collimation component for an out-space hard X-ray modulation telescope. The research work contained the characteristics of overlap multi-pass laser cladding of tungsten or tungsten nickel alloys, microstructure analyses, technique stability of laser direct manufacturing, and the final direct manufacturing of tungsten nickel collimation component. The results proved that laser direct manufacturing could be well used to manufacture specific material and geometry component of good quality, which are very difficult or even impossible by conventional manufacturing methods.
Process Stability and Parameters Optimization of Narrow-Gap Laser Vertical Welding with Hot Wire for Thick Stainless Steel in Nuclear Power Plant

Junzhao Li,Qingjie Sun,Kexin Kang,Zuyang Zhen,Yibo Liu,Jicai Feng

DOI: https://doi.org/10.1016/j.optlastec.2019.105921

IF: 4.939

2020-01-01

Optics & Laser Technology

Abstract:Incomplete fusion, pore and melt sagging are common defects for multi-layer narrow-gap laser welding with filler wire in vertical positions for large and heavy structures. This investigation showed that vertical-up laser welding had a lower sensitivity to pores than vertical-down welding, whereas increasing welding speed could improve welding stability and reduce the formation possibility of pores. For laser vertical welding with hot wire, surface tension transfer mode could effectively guarantee pre-heating of filler wire and achieve a stable welding process. The keyhole stability and melt flow varied with welding directions. The melt sagging defect was usually observed and mainly caused by the concentrated laser energy, which easily led to discontinuous weld bead. Laser beam oscillation technology increased laser melting area and promoted wetting behavior of filler wire with base metal. The weld width increased and concave weld metal surface was obtained with suitable process parameters. Narrow-gap welding process could be carried out at a small defocusing position with a lower laser power, further decreasing tendency of melt slagging. The 20-mm defect-free joint was obtained by vertical-up and vertical-down narrow-gap laser oscillation welding with hot wire.
Design of Laser Quenching Equipment for Stainless Steel Dining Knife

Feng Gao,Qipeng Cao,Xuhao Wu,Miaolong Jiang

DOI: https://doi.org/10.54097/ajst.v5i2.6044

2023-01-01

Academic Journal of Science and Technology

Abstract:Based on the research of laser quenching technology of thin blade edge, the laser quenching equipment of stainless steel dinner knife is developed. According to the structure of stainless steel knife and quenching process layout, the feeding mechanism, positioning mechanism and feeding mechanism are designed to meet the functional requirements of laser quenching automatic operation, which has high practical value to solve the problem of automatic loading and unloading of tool and accelerate the production speed of tool.
Design and Analysis of High Precision Metal Wire Cut to length System

Hao WU,Hong HU,Shaochun ZHUANG

DOI: https://doi.org/10.3969/j.issn.1001-2257.2015.11.015

2015-01-01

Abstract:针对金属丝线定长剪切,设计了一套结构简单、使用方便的自动化剪切系统。阐述了系统构成,对关键机构进行了详细设计及分析,简单介绍了自动化系统的设计及实现。最后完成了该系统的制造,实验验证了系统的性能。
Research on Car Galvanized Tailor-Welded Blanks of Fiber Laser Welding

Li Tao,Li Fang,Wang Shien,Chu Weidong,Wang Daming,Cai Yan

DOI: https://doi.org/10.3788/lop52.011406

2015-01-01

Laser & Optoelectronics Progress

Abstract:The application of galvanized steel tailor-welded blanks not only improves the corrosion resistance property of a car, but also reduces vehicle weight while the intensity maintains the same. Compared with other welding technologies, laser welding has lots of advantages, such as a narrow welding line, a high strength joint and a small heat-affected zone. However, the gap between the plates can cause surface depression and intensity deficiency. After obtaining suitable parameters of side-blown shielding gas, orthogonal experiment is designed to have a research on laser power and welding speed′s influence on weld formation through tailored blank fiber laser welding. After that, metallurgical experiments, tensile tests and cupping tests are used to detect the performance, mechanical and deep stamping properties of the welding line. The result shows an optimum parameter when the laser power is 3 kW and the welding speed is 4 m/min. On the basis of optimal parameters obtained, a further study is made on gap′s influence on weld formation. The result shows that a nice welding line can be obtained when the gap is not more than 0.15 mm(about 11.1% of the plate thickness).
Drawing Process of Tailor Welded Blank Car Center Pillar Based on FEA

LIU Xiao-jing,LIU Peng-hui,QIN Hai-bin,LI Feng,WANG Cong

2012-01-01

Journal of Central South University

Abstract:The finite element numerical simulation for the drawing process of laser tailor welded blank car center pillar was researched using software DYNAFORM.By observing the forming limit diagram(FLD) and thickness diagram and analyzing the defects of the forming parts,the forming result were improved by means of adjusting some parameters and setting equivalent draw beads to avoid some defects such as rupture,wrinkling and thinning.Improving and optimizing process was proposed based on the simulation results.Using the optimized parameters used in simulation process,the drawing experiment was carried out,and good quality experimental forming parts were obtained.The results show that selection of weld model and mesh generation of blank and tools can directly affect the simulation accuracy;parameters such as drawing velocity,blank holder force and draw bead can affect the drawing result.Especially,material flow is balanced through regulating draw beads and it solves the problem which can't be solved by adjusting the blank holder force in laser tailor welded blank forming process.

Manufacture of Workmanship Facility for Laser Cutting Tube

Application and prospect of laser manufacture technology

Study and Development of Automatic Control System for Chamfering Machine Based on PLC

A Programming Cutting System To Enhance Productivity With Individualitiesnn

Worn area modeling for automating the repair of turbine blades

Optical system of the ten-tube parallel CO2 laser welder

Femtosecond laser workstation and micro-scale machining

The Technology and Development of Laser Assisted Machining

Application of Fiber Laser On-the-fly Welding in Manufacture of Seat Frame

Laser Direct Manufacturing Specific Geometry W/Ni Component

Present situation and future trend of laser welding technique

Process and Development of Laser Forming

Vacuum laser welding equipment and method

Web based digitized tele-manufacturing service system of laser cutting

Recent Progress in Laser Peen Forming of Large Scale Panel

Laser Direct Manufacturing of Tungsten Nickel Collimation Component

Process Stability and Parameters Optimization of Narrow-Gap Laser Vertical Welding with Hot Wire for Thick Stainless Steel in Nuclear Power Plant

Design of Laser Quenching Equipment for Stainless Steel Dining Knife

Design and Analysis of High Precision Metal Wire Cut to length System

Research on Car Galvanized Tailor-Welded Blanks of Fiber Laser Welding

Drawing Process of Tailor Welded Blank Car Center Pillar Based on FEA