Abstract:Alkali activation and the combination of fly ash (FA) and ground granulated blast-furnace slag (GGBS) has been used for cementitious material, which is seen as an effective method to dispose of industrial solid waste. The GGBS-FA AAMs have the characteristic of drying shrinkage and a large number of tiny pores distributed in the matrix, resulting in strength deterioration. The paper is aimed to optimize the strength property by incorporating another solid waste of flue gas desulfurization gypsum (DG), which could be regarded as a ternary alkali-activated materials (AAMs). The unconfined compression tests are carried out to study the effects of DG content on strength with different curing times, and the effects from the modulus of the alkali activator are also analyzed. Then X-ray diffraction (XRD) and Scanning Electron Microscope (SEM) are performed to reveal the microscopic mechanism of the effects of DG on the mechanical property. Results show that the incorporation of DG can significantly improve the early strength due to the increase of calcium. The SO42- in DG continuously reacts with Ca 2+ and active silicate to form ettringite during the curing period, which can fill micro-pores and tiny cracks to form a denser matrix structure. In addition, the presence of SO42- has the effect of secondary enhanced activation, further promoting the polymerization reaction and enhancing the strength, especially for the low alkaline reaction system. These all contribute to the strength improvement. It should be noted that the DG content must be controlled to prevent the volume-filling effect that leads the AAMs matrix to be loose and porous, and the generation of geopolymer gel would also be impeded in a high-calcium reaction system, further influencing the final strength. The results will promote the application of high-performance, cost-saving, and green low-carbon cementitious material based on the synergistic utilization of GGBS, FA and DG.

Study on the Effect of Ethylene Glycol as Grinding Aid on Activity Stimulation of Grade Ⅲ Fly Ash

Effect of Additives on the Rheological and Mechanical Properties of Microfine-Cement-Based Grout

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

Particle Characteristics and Hydration Activity of Ground Granulated Blast Furnace Slag Powder Containing Industrial Crude Glycerol-Based Grinding Aids

Effect of glycerol mechanical excitation on the phase evolution and hydration activity of steel slag

Evaluation on Reactivity of Fly Ash from Different Sources in Alkali Activated System-Progressing Environmentally Construction Through Waste Utilization

Modification mechanism of flue gas desulfurization gypsum on fly ash and ground granulated blast-furnace slag alkali-activated materials: Promoting green cementitious material

Activation and Toxicity of Slag-fly Ash-fluorgypsum Cementitious Material

Influence of Mechanical Grinding on Pozzolanic Characteristics of Circulating Fluidized Bed Fly Ash (CFA) and Resulting Consequences on Hydration and Hardening Properties of Blended Cement

Performances and microstructure of one-part fly ash geopolymer activated by calcium carbide slag and sodium metasilicate powder

Workability and Environmental Evaluation of Using Sunflower Stalk Ash as an Alkali Activator with Blast Furnace Slag and Black Rice Hull Ash to Prepare Geopolymer Grouts

The Influence of Ground Fly Ash on Cement Hydration and Mechanical Property of Mortar

Effect of Solid Sodium Silicate on Workability, Hydration and Strength of Alkali-Activated GGBS/Fly Ash Paste

Mechanical activation of fly ash:effect on performance and mechanism of resulting geopolymer

The Effect of Wet-grinding on the Properties of Glass Powder and Its Application in Cement Based Materials

Effect of fly ash and gypsum on drying shrinkage and mechanical properties of one‐part alkali‐activated slag mortar

Improving the early reactivity of activated basic oxygen furnace slag – The influence of particle fineness and grinding aids

Effects of wet grinding combined with chemical activation on the activity of iron tailings powder

Study on the properties of alkali-activated phosphorus slag mortar mixed with granulated blast furnace slag/fly ash

In-Depth Insight into the Effects of Steel Slag and Calcium Hydroxide on the Properties of a Fly Ash-Red Mud Geopolymer

Effect of desulphurization gypsum on hardening mechanism of the geopolymer produced with steel slag and granulated blast furnace slag