Abstract:The layer-by-layer processing features of laser melting deposited (LMD) TC11 titanium alloy inevitably lead to microstructural inhomogeneity, and the grain morphology associated with micro-orientations induces plastic anisotropy, which causes uneven deformation and further performance deterioration. Understanding the main causes of these characteristics and how to distinguish their relative roles in inducing plastic anisotropy is critical. In this work, a high-efficiency LMD process is developed. Then, the individual factors causing the formation of elongated grains, microstructural inhomogeneity and micro-orientations are isolated to investigate the synergistic and competitive mechanisms of plastic anisotropy for high-efficiency LMD TC11 titanium alloy before and after various heat treatments. Initially, the TC11 titanium alloy is prepared by the LMD technique under high laser power and then heat-treated via three methods of double annealing in the α+β phase zone. Subsequently, the macro- and microscopic morphology, microstructure, and micro-orientations are characterized by optical microscopy (OM), scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD). The individual effects of grain shape, α grain boundary (αGB) and micro-orientations on tensile plastic anisotropy are systematically and thoroughly investigated via a hybrid method consisting of experimental and crystal plasticity finite element simulation methods. By introducing a redefined evaluation indicator of dislocation plugging coefficients, elongated grains are found to be the main source affecting the tensile strength in different loading directions. In addition, with increasing primary annealing temperature, the breakage degree of αGB parallel to the building direction (BD) is significantly higher than that perpendicular to the BD, which leads to an increase in tensile strength and elongation. Moreover, the preferred <0 0 0 1> orientation leads to different tensile strengths perpendicular and parallel to the BD, which is caused by the transformation between easy-to-slip and hard-to-slip orientations. The micro-orientations mainly affect the yield strength and elongation, while the tensile strength and elongation are simultaneously controlled by the grain morphology and αGB.

An Alignment Evaluation Method for Polycrystalline Terfenol-D Based on Magnetostriction Effect

Influence of grain morphology and orientation on saturation magnetostriction of polycrystalline Terfenol-D

Effect of the Induced Anisotropy Axis on Altering Domain Alignment and Magnetostriction of Terfenol-D

Effects of Alignment on the Magnetic and Mechanical Properties of Sintered Nd–Fe–B Magnets

Effects of the Grain Orientation on the Electrocaloric Effect of Polycrystalline Ferroelectrics

Magnetoelectricity In Laminate Composites Of Terfenol-D And 0.52 Pb(Fe1/2nb1/2)O-3-0.48 Pbtio3 With Different Orientations

Simulation on Magnetostriction Strain of Polymer-Bonded Terfenol-D Composites

Magnetic Properties of Terfenol-D Film on a Compliant Substrate

Simulation on Domain Rotation Path and Magnetostriction of Terfenol-D Alloy

The Inverse Magnetostrictive Effect in Tb-0.3 Dy-0.7 Fe-2

Microstructure related disparity of the magnetostriction in the oriented directionally solidified Fe81Ga19 polycrystals

Preparation of Terfenol-D Spherical Single-Crystal Particles and Study of Magnetostrictive Properties of Its Composites at Low Fields

Investigation of Grain Boundary and Orientation Effects in Polycrystalline Metals by a Dislocation-Based Crystal Plasticity Model

Large and sensitive magnetostriction in ferromagnetic composites with nanodispersive precipitates

A Multipeak Phenomenon Of Magnetoelectric Coupling In Terfenol-D/P(Vdf-Trfe)/Terfenol-D Laminates

Enhancing magnetostriction in FeAl alloys via crystal growth orientation tuning by a trace amount of Pt doping

Modeling Of Magnetoelectric Effect In Polycrystalline Multiferroic Laminates Influenced By The Orientations Of Applied Electric/Magnetic Fields

Grain Orientation Distributions of Polycrystalline Co-Ferrite.

Insights into orientation-dependent plasticity deformation of HfNbTaTiZr refractory high entropy alloy: An atomistic investigation

Study on Magnetic Domain Deflection in Tb0.3dy0.7fe2 Alloy

Synergistic and Competitive Mechanisms of Plastic Anisotropy in High-Efficiency Laser Melting Deposited TC11 Alloy