Abstract:Accurate prediction of welding residual stresses is often challenging due to the complexity of the welding process which includes moving heat source, temperature-dependent material properties etc. Over the past two decades or so, the numerical simulation technologies have been widely used in the welding process and a number of numerical models have been proposed to predict temperature field and residual stresses field induce by welding process. In the previous numerical simulations, the weldment was either in Free State or rigidly constrained. Such manipulations can not reflect the realistic constraint conditions of the weldment. In this simulation, clamps and backing board are all included in the model as elastic body and analytical rigid body, respectively. In the thermal analysis, the thermolysis of clamps and backing board can be equivalent to forced convection heat transfer, where the coefficients of forced convection heat transfer are temperature dependent; in the mechanical analysis, both the contact interaction between clamps and weldment and the contact interaction between backing board and weldment are considered, normal and tangent contact interaction properties are assumed as "HARD" contact and Coulomb friction, respectively. After welding process, residual compressive plastic strains existing in the weld zone and HAZ are the sources of residual stresses. Post welding cold rolling is an effective and convenient method to reduce residual compressive plastic strains induces by welding especially for thin-walled structure. In the previous researches, either welding process and cold rolling process were treated as two separate processes or only the residual stresses induced by welding process was considered as initial condition in the cold rolling process. In this simulation, welding residual stresses, plastic strains and deformations are all imported as the initial state of the cold rolling process to increase the accuracy of the numerical simulation. The import of plastic strains will affect the accuracy of the numerical simulation for the material which has obvious work harden effect.

RESEARCH AND PROGRESS ON THE NUMERICAL SIMULATION OF THE WELDING SOLIDIFYING CRACKING

DAMAGE ACCUMULATION, FRACTURE AND POST FRACTURE ANALYSES FOR INITIALLY FLAWED STEEL STRUCTURES

Finite element simulation of welding process and real-time monitoring assessment

EXPERIMENTAL RESEARCH AND NUMERICAL SIMU- LATION OF SOLIDIFICATION CRACK DURING LASER WELDING OF RING STRUCTURE

Development Status of Welding Numerical Simulation Technology

Study on Solidification Cracking of Laser Dissimilar Welded Joints by Using In-Situ Observation and Numerical Simulation

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Present Situation and Prospect of Welding Simulation Technology

Numerical Investigations on Residual Stress in Laser Penetration Welding Process of Ultrafine-Grained Steel

Recent Research Progress in the Mechanism and Suppression of Fusion Welding-Induced Liquation Cracking of Nickel Based Superalloys

High precision modeling of welding and post welding cold rolling continuous process in numerical simulation

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Study on Hot Crack for the Casting of Bolster and Side Bearer by Numerical Simulation

A CFD Study on Intergranular Liquid Feeding and Cracking During Solidification in Welding

Numerical analysis of ultrasonic spot welding of metal sheets: a review

Prediction of Solidification Cracking by In-situ Observation and 3D FEM-Analysis

Prediction of the influence of welding metal composition on solidification cracking of laser welded aluminum alloy

Advances in Numerical Simulation of High-Speed Impact Welding

Progress on Numerical Simulation of Mold Filling and Solidification Processes of Shaped Castings

Welding hot cracking characteristics and fracture mechanisms of nickel‐based alloy NS1402 under different constraint conditions

Numerical Investigation on Molten Pool Dynamics and Defect Formation in Electron Beam Welding of Aluminum Alloy