Abstract:Direct internal reforming solid oxide fuel cells (DIR-SOFCs) are economically viable devices for power generation, while their reliability requires further improvement. Advanced process control can effectively facilitate the long-term operation of SOFCs with high efficiency and safety. DIR-SOFCs exhibit complex coupling effect and a high degree of nonlinearity, making it worthwhile to embed high-quality dynamic models including spatial distributions into nonlinear model predictive control (NMPC). A two-layer control architecture aiming for rapid load tracking and thermal management with high economic efficiency is designed for planar DIR-SOFCs, containing a set point optimizer and an NMPC controller based on the distributed parameter model expressed by partial differential–algebraic equations (PDAE). PDAE-constrained dynamic optimization problems are solved in the NMPC controller to seek optimal control strategies, considering safety constraints about the maximum temperature gradient and physical constraints of actuators. The high-fidelity one-dimensional PDAE model is validated through steady and dynamic simulations, and the optimal steady-state distributions are analyzed under three power demands. Behaviors of the closed-loop system under power demand step-up and step-down scenarios are investigated to demonstrate the effectiveness of the designed control scheme. The proposed NMPC controller can efficiently realize rapid load tracking, maintain good thermal management, and reduce the transition time, with minor steady-state errors and acceptable real-time performance.

Nonlinear multivariable predictive control of an autothermal reforming reactor for fuel cell applications

A Thermal Management Strategy for Proton Exchange Membrane Fuel Cell via Nonlinear Model Predictive Control

Multiple Model Predictive Control for Oxygen Starvation Prevention of Fuel Cell System

Adaptive nonlinear model predictive control for a class of multivariable chemical processes

Neural network model based predictive control for multivariable nonlinear systems

Nonlinear Model Predictive Control Based on Variable Gain

Integrated Motion and Powertrain Predictive Control of Intelligent Fuel Cell/Battery Hybrid Vehicles

Nonlinear control of an autothermal fuel reforming system

Autothermal reforming of gasoline for fuel cell applications: Controller design and analysis

Adaptive multistep model predictive control for tubular grid-connected solid oxide fuel cells

Advanced Self-Adapted Predictive Control Strategy for High-Power Vehicular Fuel Cell System Thermal Management

Nonlinear model predictive control of direct internal reforming solid oxide fuel cells via PDAE-constrained dynamic optimization

Nonlinear Model Predictive Control Based on the Moving Horizon State Estimation for the Solid Oxide Fuel Cell

Nonlinear model predictive control applied to multivariable thermal and chemical control of selective catalytic reduction aftertreatment

An Adaptive Nonlinear Model Predictive Control Based On Online Svm Regression Algorithm

Thermal Management of an Independent Steam Reformer for a Solid Oxide Fuel Cell with Constrained Generalized Predictive Control

Constrained computationally efficient nonlinear predictive control of Solid Oxide Fuel Cell: Tuning, feasibility and performance

A Coordinating Control Strategy for Autothermal Fuel Reforming Systems

Nonlinear Model Predictive Control (NMPC) of the Solvent-Based Post-Combustion CO2 Capture Process

A New Method of Improved Generalized Predictive Control for Solid Oxide Fuel Cell's Temperature System

A multivariable sliding mode predictive control method for the air management system of automotive fuel cells