Abstract:Direct internal reforming solid oxide fuel cells (DIR-SOFCs) are economically viable devices for power generation, while their reliability requires further improvement. Advanced process control can effectively facilitate the long-term operation of SOFCs with high efficiency and safety. DIR-SOFCs exhibit complex coupling effect and a high degree of nonlinearity, making it worthwhile to embed high-quality dynamic models including spatial distributions into nonlinear model predictive control (NMPC). A two-layer control architecture aiming for rapid load tracking and thermal management with high economic efficiency is designed for planar DIR-SOFCs, containing a set point optimizer and an NMPC controller based on the distributed parameter model expressed by partial differential–algebraic equations (PDAE). PDAE-constrained dynamic optimization problems are solved in the NMPC controller to seek optimal control strategies, considering safety constraints about the maximum temperature gradient and physical constraints of actuators. The high-fidelity one-dimensional PDAE model is validated through steady and dynamic simulations, and the optimal steady-state distributions are analyzed under three power demands. Behaviors of the closed-loop system under power demand step-up and step-down scenarios are investigated to demonstrate the effectiveness of the designed control scheme. The proposed NMPC controller can efficiently realize rapid load tracking, maintain good thermal management, and reduce the transition time, with minor steady-state errors and acceptable real-time performance.

Nonlinear Model Predictive Control Based on the Moving Horizon State Estimation for the Solid Oxide Fuel Cell

A Thermal Management Strategy for Proton Exchange Membrane Fuel Cell via Nonlinear Model Predictive Control

Multiple Model Predictive Control for Oxygen Starvation Prevention of Fuel Cell System

Nonlinear model predictive control of direct internal reforming solid oxide fuel cells via PDAE-constrained dynamic optimization

Multiple Model Predictive Hybrid Feedforward Control Of Fuel Cell Power Generation System

Constrained model predictive control of a solid oxide fuel cell based on genetic optimization

Multiple model predictive control for solid oxide fuel cells

Constrained computationally efficient nonlinear predictive control of Solid Oxide Fuel Cell: Tuning, feasibility and performance

Nonlinear Model Predictive Control of Sofc Based on A Hammerstein Model

Current-based MPC for Operating-Safety Analysis of a Reduced-Order Solid Oxide Fuel Cell System

A Novel Adaptive Model Predictive Control Strategy of Solid Oxide Fuel Cell in DC Microgrids

Multi-model Predictive Control of Solid Oxide Fuel Cells

Data-driven Nonlinear Control of a Solid Oxide Fuel Cell System

Voltage and Fuel Utilization Control for Solid Oxide Fuel Cells with Combined L1 Adaptive – Predictive Control Strategy

Fuzzy Model Predictive Control of Solid Oxide Fuel Cell with Zone Tracking

Nonlinear model predictive control for mode‐switching operation of reversible solid oxide cell systems

Study on an Adaptive Multi-Model Predictive Controller for the Thermal Management of a SOFC-GT Hybrid System

Predictive Control of SOFC Based on a GA-RBF Neural Network Model

Feedforward and Desired Dynamic Equation Control for Solid Oxide Fuel Cell System.

Thermoelectric Tracking Control of Solid Oxide Fuel Cell System Using Adaptive Dynamic Programming

Optimal Load-Tracking Operation of Grid-Connected Solid Oxide Fuel Cells Through Set Point Scheduling and Combined L1-MPC Control