Abstract:Because of the random distribution of diamond abrasive grains on the surface and the obstruction of chip flow during processing, conventional grinding tool cannot meet the requirements of the machining precision. Therefore, the emergency of special grinding tools such as surface structured grinding wheels improves the machining precision. In this study, rhombus textured grinding tools with different arrangement angles α are manufactured, the grinding mechanism of them is studied, the penetration depth model and grinding force model are established, and the grinding performance of conventional grinding tool and rhombus textured grinding tools are compared. It can be found that when α = 50°, the surface quality of the rhombus textured grinding tools for grinding single crystal silicon and BK7 is significantly better than that of conventional grinding tool, and the surface roughness of single crystal silicon machined by rhombus textured grinding tool is 20.2–37.4% smaller than that of conventional grinding tool. The instantaneous grinding forces of the two kinds of tools are compared, they both conform to the sinusoidal change, but the amplitude of the instantaneous grinding force of conventional grinding tool is at least 22.1% bigger than that of the rhombus textured grinding tool with α = 50°. Furthermore, the average grinding force of the rhombus textured grinding tool with α = 50° is not only very stable, but also much smaller than that of conventional grinding tool. Finally, in order to verify the average grinding force model, the test value of the average grinding force of the rhombus textured grinding tool with α = 50° and the predicted value of the model are compared, when the cutting depth is 20 μm and the material is single-crystal silicon, the average error in the x direction and y direction are 15.2% and 19.0%, respectively.

Study on Abrasive Geometry of Quick-Point Grinding

Theoretical Generalization and Research on the Mechanism of the Unsteady-State Grinding Technique

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Study on Grinding Force Model in Ultrasonic Vibration Assisted Grinding for Ductile Materials

Experimental Study of the Correlation of Flexible Abrasive Grinding Parameters

Investigation of the grinding temperature and subsurface quality of a novel point grinding wheel

Geometric Characteristic Modeling for Flexible Contact of Sanding Wheel–polished Complex Surface

Research and Experiment on a Free Surface by Patch Grinding

Study on Non-Interference Normal Tracking Algorithm for NC Quick-Point Grinding of the Curve Parts

Establishment of dynamic grinding force model for ultrasonic-assisted single abrasive high-speed grinding

Influence of Thermal-mechanical Coupling of Single Particle on Grinding Surface Roughness

Study on the Influence of Geometrical Parameters of Abrasive Grains in Abrasive Flow Machining

Analytical Modelling of Both Parallel and Cross Grinding with Arc-Shaped Wheel for Grinding-Induced Damage and Grinding Force

Discrete Element Analysis and Experimental Validation of Forces in Grinding of Granite with Single Diamond Grain

A parametric evaluation model of abrasive interaction for predicting tooth rough surface in spiral bevel gear grinding

Modeling and experimental study on the grinding performance of precision diamond grinding tool with defined texture

Interference and grinding characteristics in ultra-precision grinding of thin-walled complex structural component using a ball-end grinding wheel

Inclined Axis Ultra-Precision Grinding for Spherical Surface

Grinding Wheel Wear in Grinding of High Hardness Spherical Surface with Cup Wheel

Grinding force modeling in ultrasonic-assisted face grinding of ZrO2 ceramics and influence of grinding wheel wear on its accuracy