Abstract:Novel super toughened bioplastics are developed through controlled reactive extrusion processing, using a very low content of modifier, truly a new discovery in the biodegradable plastics area. The super toughened polylactide (PLA) blend showing a notched impact strength of ∼1000 J/m with hinge break behavior is achieved at a designed blending ratio of PLA, poly(butylene succinate) (PBS), and poly(butylene adipate-<i>co</i>-terephthalate) (PBAT), using less than 0.5 phr peroxide modifier. The impact strength of the resulting blend is approximately 10 times that of the blend with the same composition without a modifier and ∼3000% more than that of pure PLA. Interfacial compatibilization among the three biodegradable plastics took place during the melt extrusion process in the presence of a controlled amount of initiator, which is confirmed by scanning electron microscopy and rheology analysis. The synergistic effect of strong interfacial adhesion among the three blending components, the decreased particle size of the most toughened component, PBAT, to ∼200 nm, and its uniform distribution in the blend morphology result in the super tough biobased material. One of the key fundamental findings through the in situ rheology study depicts that the radical reaction initiated by peroxide occurs mainly between PBS and PBAT and not with PLA. Thus, the cross-linking degree can be controlled by adjusting renewable sourced PLA contents in the ternary blend during reactive extrusion processing. The newly engineered super toughened PLA with high stiffness and high melt elasticity modulus could reasonably serve as a promising alternative to traditional petroleum plastics, where high biobased content and biodegradability are required in diverse sustainable packaging uses.

Preparation, Characterization and Properties of Binary and Ternary Blends with Thermoplastic Starch, Poly(lactic Acid) and Poly(butylene Adipate-Co-terephthalate)

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Preparation and Characterization of Poly(butylene Succinate-Co-adipate)/poly(lactic Acid) Blends with Enhanced Compatibility, Mechanical Properties, and Heat Resistance

In Situ Chemical Modification of Thermoplastic Starch with Poly(L-lactide) and Poly(butylene succinate) for an Effectively Miscible Ternary Blend

Characterization and Properties of Nucleated Polylactide, Poly(butylene adipate-co-terephthalate), and Thermoplastic Starch Ternary Blend Films: Effects of Compatibilizer and Starch

Physical and degradation properties of binary or ternary blends composed of poly (lactic acid), thermoplastic starch and GMA grafted POE

Exploring the Processing Potential of Polylactic Acid, Polyhydroxyalkanoate, and Poly(butylene succinate- co-adipate) Binary and Ternary Blends

Effect of Styrene-Maleic Anhydride Copolymer on Properties of PBST/PLA Blends

Sustainable and high‐performance ternary blends from polylactide, CO 2 ‐based polyester and microbial polyesters with different chemical structure

Ternary blends from biodegradable poly(L-lactic acid), poly(ε-caprolactone) and poly(vinyl acetate) with balanced properties

Ternary blends from biological poly(3-hydroxybutyrate-co-4-hydroxyvalerate), poly(L-lactic acid), and poly(vinyl acetate) with balanced properties

Thermoplastic Starch (TPS)/Polylactic Acid (PLA) Blending Methodologies: A Review

Improvement of rheology and mechanical properties of PLA/PBS blends by in-situ UV-induced reactive extrusion

Super Toughened Poly(lactic acid)-Based Ternary Blends via Enhancing Interfacial Compatibility

Reactive Compatibilization of Polylactide, Thermoplastic Starch and Poly(butylene adipate-co-terephthalate) Biodegradable Ternary Blend Films

A reactive compatibilization with the compound containing four epoxy groups for polylactic acid/poly(butylene adipate-co-terephthalate)/thermoplastic starch ternary bio-composites

Effect of Triphenyl Phosphite on the Properties of PLA/PBS Blend System

Design strategy for blends of biodegradable polyester and thermoplastic starch based on a molecular dynamics study of the phase-separated interface

Enhancement of the properties of biodegradable poly(L-lactide)/poly(butylene carbonate) blends by introducing stereocomplex polylactide crystals

Preparation and Characteristics of Poly(butylene adipate-co-terephthalate)/Polylactide Blend Films via Synergistic Efficiency of Plasticization and Compatibilization

Functionalization of poly(butylene adipate‐co‐terephthalate) and its compatibilizing effect on PBAT/thermoplastic starch blends