Abstract:The efficient use of coal resources and the safe operation of coal-fired boilers are hindered by high-temperature corrosion caused by corrosive sulphur components. To predict the impact of sulphur–nitrogen interactions on sulphur's evolution and its mechanism of action, a conventional sulphur component evolution model (uS–N) and an improved sulphur component evolution model (S–N) that considers sulphur–nitrogen interactions were proposed in the present study. The models were built using OpenFOAM–v8 software for the coal combustion process, and the generation of SO2, H2S, COS, and CS2 was simulated and analysed under different air excess coefficients. The simulations were conducted to analyse the patterns of SO2, H2S, COS, and CS2 generation at different air excess factors. The results show that, compared with the uS–N condition, the simulated values of coal combustion products (SO2, H2S, COS, and CS2) under the S–N condition were closer to the experimental values, and the errors of different sulphur components at the furnace exit were all less than 5%. As such, the S–N model can more accurately predict the evolution of sulphur components. In the simulation range, when the air excess factor increased from 0.7 to 0.9, the production rate of SO2 increased, while the production rates of corrosive sulphur components H2S, COS, and CS2 decreased significantly by 41.3%, 34.8%, and 53.8%, respectively. Further, the mechanism of the effect of sulphur–nitrogen interactions on the generation rates of different components was revealed at different air excess coefficients. Here, the effect of sulphur–nitrogen interactions on SO2 and COS was found to be more significant at smaller air excess coefficients, and the effect of sulphur–nitrogen interactions on H2S and CS2 was more significant at larger air excess coefficients. The present study can provide a theoretical basis for predicting the evolution of sulphur components during coal combustion and improving the high-temperature corrosion problems caused by such a process.

Modeling Hydrogen Production in Super-Adiabatic Combustion of Hydrogen Sulfide in Porous Media

Numerical simulation of hydrogen production in porous media from hydrogen sulfide by partial oxidation

Determination of Hydrogen Production from Rich Filtration Combustion with Detailed Kinetics Based CFD Method

Development of Sulfur Release and Reaction Model for Computational Fluid Dynamics Modeling in Sub-Bituminous Coal Combustion

Modeling of Supercritical-Pressure Turbulent Combustion of Hydrocarbon Fuels Using A Modified Flamelet-Progress-Variable Approach

Experimental and Modeling Study of H2S Formation and Evolution in Air Staged Combustion of Pulverized Coal

Advanced Modeling Approaches for CFD Simulations of Coal Combustion and Gasification

Experimental and kinetic modeling study of the CH4+H2S+air laminar burning velocities at atmospheric pressure

Exploring the Combustion Mechanism of Single Micron-Sized Aluminum Particles with a Numerical Model

Effects of Air and Oxy-Fuel Atmospheres on Flamelet Modeling of Pollutant Formation in Laminar Counterflow Solid Fuel Flames

Large Eddy Simulation of Soot Formation in a Turbulent Lifted Flame with a Discretized Population Balance and a Reduced Kinetic Mechanism

Numerical Investigation of Swirl-Stabilized Pulverized Coal Flames in Air and Oxy-Fuel Atmospheres by Means of Large Eddy Simulation Coupled with Tabulated Chemistry

Simulation Study of the Formation of Corrosive Gases in Coal Combustion in an Entrained Flow Reactor

Experimental Study of Super-Adiabatic Combustion in Free-Dumping Porous Media

Mathematical Modeling of a Porous Media Burner Based Methane Flame Fuel Cell

Modeling of Sulfur Retention in Circulating Fluidized Bed Coal Combustors

Mathematical Model of the Combustion Process of Hydrogen Sulfide and Ammonia Gases in a Claus Reaction Furnace Using Computational Fluid Dynamics

Computational modeling of oxy-coal combustion with intrinsic heterogeneous char reaction models

Development and Validation of a Quasi-Dimensional Combustion Model for SI Engines Fuelled by HCNG with Variable Hydrogen Fractions

Numerical Simulation of Gasoline Stratified Charge Compression Ignition Using 3D-CFD Coupled with Detailed Chemistry

Modelling the Mechanism of Sulphur Evolution in the Coal Combustion Process: The Effect of Sulphur–Nitrogen Interactions and Excess Air Coefficients