Abstract:Magnesium-based materials offer a promising, cost-effective, and high-capacity solution for hydrogen storage. However, their slow kinetics and elevated absorption/desorption temperatures limit their large-scale application. In this study, a series of Mg1-x/Vx (x = 0.05, 0.10, 0.15, 0.20) multilayer films were designed and fabricated using an ultra-high vacuum magnetron sputtering technique. Transmission electron microscopy (TEM) analysis revealed the presence of a discontinuous nanoscale V single-phase interlayer between the Mg layers, confirming the successful formation of Mg/V multilayer films. The surface of the deposited films predominantly consists of hexagonal particles of varying sizes stacked upon one another. Upon hydrogenation, tetragonal rutile structures of MgH2 and V2H were formed. The Mg0.95V0.05 film absorbed 6.40 wt% hydrogen within 15 min at 150 degrees C and desorbed 0.34 wt% hydrogen within 1.8 h at the same temperature, with an initial dehydrogenation temperature of 79 degrees C. The activation energies for hydrogen absorption and desorption were estimated to be 60 +/- 7 and 140 +/- 10 kJ/mol H2, respectively, significantly lower than the corresponding values of 100 and 160 kJ/mol H2 for conventional pure Mg/MgH2. The enhanced hydrogen absorption performance was attributed to the catalytic effect of nanocrystalline V at the Mg/V incoherent interface, while the improved desorption performance was due to the synergistic catalytic effect of nanocrystalline V2H at the MgH2/V2H incoherent interface. DFT calculations indicated that the interaction at the Mg/V incoherent interface promoted H atom adsorption and diffusion, significantly enhancing the hydrogenation and dehydrogenation performance of the multilayer films.

Microstructure of MmM5/Mg Multi‐layer Hydrogen Storage Films Prepared by Magnetron Sputtering

Microstructure of MmNi3.5(CoAlMn)1.5/Mg Multi-layers for Hydrogen Storage

Microstructure of MmM5/Mg multi-layer films prepared by magnetron sputtering

Microstructure and Hydrogen Storage Properties of MmNi3.5 (coalmn) 1.5/mg Multi-Layers

Hydrogen Storage Properties of Preferentially Orientated Mg-Ni Multilayer Film Prepared by Magnetron Sputtering

Hydrogen sorption properties of Mg/Mm–Ni multi-layer film prepared by thermal evaporation

Microstructure and Hydrogen Storage Characteristics of Nanocrystalline Mg+xwt% LaMg2Ni (x=0–30) Composites

Microstructure, Hydrogenation and Optical Behavior of Mg–Ni Multilayer Films Deposited by Magnetron Sputtering

Composite structure and hydrogen storage properties in Mg-base alloys

Hydrogen Storage Properties of Mg and Mg-Ni Films Prepared by Thermal Evaporation

Hydrogen Storage Properties of Mg+10% TiFe_(1-x)Cr_x(x=0,0.3) Multi-Phase Alloys

Remarkably Improved Hydrogen Storage Properties of Carbon Layers Covered Nanocrystalline Mg with Certain Air Stability

Phase-structure and Hydrogen Storage Behaviors of Mg+10％ Ni2P Composite Prepared by Reactive Ball-Milling

Mgni/Pd Multilayer Hydrogen Storage Thin Films Prepared by Dc Magnetron Sputtering

Microstructures And Hydrogen Desorption Properties Of The Mgh2-Alh3 Composite With Nbf5 Addition

Hydrogen storage and structure variation in Mg/Pd multi-layer film

In-situ formation of uniform Mg 2 Ni catalyst and hydrogen storage properties of Mg 41Ni alloys with varied grain sizes and morphologies

In-situ Formation of Uniform Mg2Ni Catalyst and Hydrogen Storage Properties of Mg41Ni Alloys with Varied Grain Sizes and Morphologies

Regulation of Nanoscale Mg/V Incoherent Interface Interactions to Enhance Hydrogen Storage Properties in Mg/V Multilayer Films

Cyclic Hydrogen Storage Properties of Mg Milled with Nickel Nano-Powders and Mno2

The Effect of Mg Content on Microstructure and Hydrogen Absorption Properties of Mechanical Alloyed MmNi3.5(CoAlMn)1.5–Mg