Abstract:Interfacial shear strength, as an important parameter, is often used to estimate the bonding of the interface. In order to evaluate the interfacial shear strength, pull-out, push-out and multiple-fracture methods have been used. Multiple-fracture method, which is also called single-fiber-composite technique, relies on multiple fragmentation under axial tension of a single fiber embedded in a matrix. However, it is not easy to examine the number of the multiple fragmentation. On the other hand, acoustic emission (AE) method, which is an effective one to monitor the failure process in structure material, has been applied to polymer or metal matrix composites. The authors have examined the micro fractures, such as yielding of the matrix, failing of the interface and multiple breaking of the fibers in SiC/Al composite by using acoustic emission method. In that work, it was clear that the number of the broken fiber in the composite was in correspondence with AE events when amplitude is over 100dB. In this study, three kinds of single fiber SiC/Al composites with different interfacial bonding strength were fabricated by the hot press processes. The number of the multiple broken fiber were evaluated by acoustic emission method during the tensile test, and then the interfacialmore » shear strengths were calculated. Further, the number was also investigated by extracting the multiple fragmentation in the composite, and counting the number of the load drop on the load-time curve after the tensile test. Finally, both the number of the multiple broken fiber and the interfacial shear strength obtained from AE and the other two methods were compared and discussed.« less

Fragmentation Study of Interfacial Shear Strength of Single SiC Fiber Reinforced Al after Fatigue

Monte Carlo Simulation of Single Fiber Composite Fragmentation Process Based on the Elastic-Plastic Shear-Lag Theory

Analysis of interfacial shear strength of SiCAl composite by acoustic emission method

Characterization and modeling of fatigue behavior of chopped glass fiber reinforced sheet molding compound (SMC) composite

Micromechanical Modeling Tensile and Fatigue Behavior of Fiber-Reinforced Ceramic-Matrix Composites Considering Matrix Fragmentation and Closure

Effect of interface damage on tensile behavior of fiber-reinforced ceramic-matrix composites after thermal fatigue loading

Fatigue behavior and damage analysis of PIP C/SiC composite

Assessment Of Interfacial Adhesion Between Carbon Fiber And Epoxy By Transverse Fiber Bundle And Single Fiber Fragmentation Tests

Interface Debonding Criteria in SiC Fiber-Reinforced Composites

Numerical Simulation of the Fiber Fragmentation Process in Single-Fiber Composites

Experimental Study on Interfacial Bond Behavior between CFRP Sheets and Steel Plates under Fatigue Loading

Damage failure mechanism of unidirectional fiber reinforced SiC f /SiC composites under uniaxial tension

Experimental and Numerical Investigations of Tensile Properties of SiC Particle‐Reinforced Composites

An improved analytical model for inversely determining multiple interfacial parameters from single fiber micro-Raman and fragmentation tests

Micromechanical Modeling of Damage Evolution and Mechanical Behaviors of CF/Al Composites under Transverse and Longitudinal Tensile Loadings.

Study of SiC fiber axial compressive behavior using tensile recoil measurement

In situ mechanical testing of an Al matrix composite to investigate compressive plasticity and failure on multiple length scales

Effect of sizing on the interfacial shear strength of carbon fiber/epoxy resin monofilament composite

Micromechanical modeling of longitudinal compression behavior and failure mechanism of unidirectional carbon fiber reinforced aluminum composites involving initial fiber misalignment

Thermo-Mechanical Fatigue of a SiC<SUB>W</SUB>/6061Al Composite

A Thermodynamic Strength Theoretical Model to Explain and Predict Pseudo-Ductility Behavior of SiCf/SiC Composite Material