Abstract:The preparation of concrete materials using carbonated steel slag through the slurry carbonation process is an effective method to overcome environmental problems caused by steel slag stacking and CO2 emissions. However, the relationship between material properties and CO2 sequestration efficiency has not been extensively investigated. In this study, we thoroughly investigated the property-intensifying mechanism of cement-based materials after doping with carbonated steel slag. The compressive strength, water adsorption, and soundness changes were analyzed under different conditions. Moreover, a quantitative model of the relationship between the material properties and influencing factors was analyzed by the response surface methodology (RSM). The block compressive strength and water absorption increased as the steel slag carbonation degree and curing duration increased. In addition, the soundness increased as the steel slag carbonation degree and L/S ratio increased. The compressive strength increased from 47.51 to 69.24 MPa, the water absorption increased from 0.15 to 0.27 g H2O/g solid, and the soundness decreased from ± 4 to ± 1 mm when the steel slag carbonation degree increased from 3 to 7 pct to 23 to 27 pct and the S/C ratio, L/S ratio, and curing duration were 0.11, 0.20 L/kg, and 28 days, respectively. The response surface methodology (RSM) results show that the theoretical maximum compressive strength was 75.85 MPa at a steel slag carbonation degree of 34.53 pct, L/S ratio of 0.15 L/kg, S/C ratio of 0.04, and curing duration of 70 days. The strategy of improving cement material properties by doping carbonate steel slag through the slurry carbonation process is demonstrated to be feasible, which broadens the collaborative horizon of CO2 sequestration and resourceful steel slag disposal.

Effects of Time on Steel Slag Carbonation

Effect of Carbonation Treatment on the Properties of Steel Slag Aggregate

Effects of carbonation degree on the hydration reactivity of steel slag in cement-based materials

Analysis of Mechanical Performance and Microstructure of Steel Slag Processed with Accelerated Carbonation

Interdependent factors contributing towards carbonation of steel slag compact: consideration of casting pressure, water dosage and carbonation duration

Effect of CO2 treatment on the microstructure and properties of steel slag supplementary cementitous materials

Effect of Carbonation Treatment on the Strength and CO2 Uptake Rate of Composite Cementitious Material with a High Steel Slag Powder Content

Experimental Study on the Effects of Carbonated Steel Slag Fine Aggregate on the Expansion Rate, Mechanical Properties and Carbonation Depth of Mortar

Accelerated carbonation of steel slag monoliths at low CO2 pressure – microstructure and strength development

Evaluation of Potential Factors Affecting Steel Slag Carbonation

Influence of the key factors on the performance of steel slag-desulphurisation gypsum-based hydration-carbonation materials

Accelerated carbonation of steel slag: A review of methods, mechanisms and influencing factors

Development of high-volume steel slag as cementitious material by ethylenediamine tetraacetic acid induced accelerated carbonation

Effect of Different Hydration Time on Carbonation Degree and Strength of Steel Slag Specimens Containing Zeolite

Impacts of Hydration Degree of Steel Slag on Its Subsequent CO2 Capture Behaviors and Mechanical Performances of Prepared Building Materials

Material Properties of Cement Doped with Carbonated Steel Slag Through the Slurry Carbonation Process: Effect and Quantitative Model

A Review on the Carbonation of Steel Slag: Properties, Mechanism, and Application

Effect mechanism of steel slag on CO2 capture in hydraulic lime

Production of cleaner high-strength cementing material using steel slag under elevated-temperature carbonation

Influence of Steel Slag on Mechanical Properties and Durability of Concrete

Carbonation of blast furnace slag concrete at different CO 2 concentrations: Carbonation rate, phase assemblage, microstructure and thermodynamic modelling