Abstract:In the present work, a novel poly(arylene ether ketone) with a unique molecular design that included concentrated flexible sulfoalkyl groups and a silane cross-linked network (C-SPAEK) was prepared and used as a PEM for DMFCs. The chemical structures, sulfonation degree and phase-separated morphology were characterized and identified by 1 H NMR, FT-IR and SAXS. The resulting copolymers exhibited excellent thermal stability (T 5% >263.8 °C) and mechanical properties (tensile strength>52.88 MPa). Additionally, the high IEC values and obvious hydrophilic/hydrophobic phase-separated structure (d > 2.71 nm) ensured that the C-SPAEK membranes possessed high proton conductivities . The C-SPAEK PEMs also displayed enhanced methanol resistance and dimensional stability, which were much better than those of a recast Nafion membrane under the same conditions. The C-SPAEK-0.4 membrane maintained a low methanol absorption of less than 48.7%, even in 4 M methanol solution. In particular, the C-SPAEK-0.6 membrane exhibited the best comprehensive performance, with a high proton conductivity (0.164 S cm −1 ), low methanol uptake (52.1%) and permeability (3.63 × 10 −7 cm 2 s −1 ), and maximum power density (83.2 mW cm −2 ), when immersed in 2 M methanol at 80 °C in a DMFC single-cell. These results suggested that the C-SPAEK membranes were sufficiently tough and had the potential to overcome the problems caused by the high methanol permeability of PEMs. The unique molecular design of C-SPAEK guaranteed a rare combination of high proton conductivity and enhanced methanol resistance, which are the key determining factors for DMFC applications.

Layer-By-Layer Self-Assembly of in Situ Polymerized Polypyrrole on Sulfonated Poly(Arylene Ether Ketone) Membrane with Extremely Low Methanol Crossover

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Surface Modification of Heteropoly Acid/speek Membranes by Polypyrrole with a Sandwich Structure for Direct Methanol Fuel Cells

Design of a stable and methanol resistant membrane with cross-linked multilayered polyelectrolyte complexes for direct methanol fuel cells

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Silane cross-linked network and concentrated flexible sulfoalkyl groups for forming a novel C-SPAEK membrane with enhanced methanol resistance and proton conductivity for DMFC applications

Preparation and Properties of Sulfonated Poly(ether Ether Ketone)s (speek)/polypyrrole Composite Membranes for Direct Methanol Fuel Cells

Preparation and Properties of Novel Cross-Linked Sulfonated Poly(arylene Ether Ketone) for Direct Methanol Fuel Cell Application

Structural optimization and performance trade-off strategies for semi-crystalline sulfonated poly(arylene ether ketone) membranes in high-concentration direct methanol fuel cells

Synthesis, characterization, and transport properties of Nafion-polypyrrole membrane for direct methanol fuel cell (DMFC) application

High Performance Tetra-Sulfonated Poly(p-Phenylene-co-aryl Ether Ketone) Membranes with Microblock Moieties for Passive Direct Methanol Fuel Cells

Novel side-chain-type sulfonated poly(arylene ether ketone) with pendant sulfoalkyl groups for direct methanol fuel cells

Novel covalent-ionically cross-linked membranes with extremely low water swelling and methanol crossover for direct methanol fuel cell applications

Cross-linked Sulfonated Poly(arylene Ether Nitrile)s Membranes Based on Macromolecule Cross-Linker for Direct Methanol Fuel Cell Application

Characterization of Polyethylene-Graft-Sulfonated Polyarylsulfone Proton Exchange Membranes for Direct Methanol Fuel Cell Applications

Novel Proton Exchange Membranes Based on Sulfonated-Phosphonated Poly (P-Phenylene-co-aryl Ether Ketone) Terpolymers with Microblock Structures for Passive Direct Methanol Fuel Cells

A High-Methanol-Permeation Resistivity Polyamide-Based Proton Exchange Membrane Fabricated via a Hyperbranching Design

Preparation and DMFC performance of a sulfophenylated poly(arylene ether ketone) polymer electrolyte membrane

Fluorinated Naphthalene-Based Poly(arylene Ether Ketone)s Containing Pendant Groups for Direct Methanol Fuel Cells

Preparation and properties of bisphenol A-based sulfonated poly(arylene ether sulfone) proton exchange membranes for direct methanol fuel cell

Sulfonated Poly(phthalazinone Ether Ketone) for Proton Exchange Membranes in Direct Methanol Fuel Cells