Abstract:Given the challenges encountered in injecting grout into micro-cracked rock masses, a modified ultrafine cementitious grout material (MUCG) was developed using ultrafine cement, polyvinyl alcohol (PVA) fibers, and a high-efficiency superplasticizer. To identify the optimal ratio of constituents for grouting these rock masses, extreme difference and multiple linear regression analyses were conducted based on test results of flowability and mechanical properties. A mix comprising 9% silica fume, 0.2% bentonite, 0.3% PVA fibers, 0.15% superplasticizer, and 2% setting accelerator was identified as the optimal mix. The microstructure characteristics of the optimal MUCG (MUCGop) grout cemented body were analyzed using XRD, FTIR, BET, and SEM. XRD and FTIR analyses indicated that a substantial amount of C-(A)S-H gel, CH, and AFt were formed within the first 3 days, highlighting the early strength characteristics of MUCGop. Over time, the content of C-A-H stabilized at 22%, the amount of CH decreased from 19% to 14%, whereas the amount of AFt increased to 15.9% by Day 28. Unexpectedly, CaCO3 content increased due to carbonation, reaching 37.3% by Day 28. BET and SEM analyses demonstrated that the specific surface area and porosity (most probable pore size) gradually decreased over time. At various ages, mesopores (cumulative pore diameter, median pore diameter) initially increased and then decreased. Micro-cracks appeared in the cemented body by Day 7, resulting in a slight decrease in strength (3.92%) from Day 3 to Day 7. The formation of well-developed needle-like AFt, C-(A)S-H gel, and small-volume plate-like CH contributed to uniform cementation and a denser structure. From Day 7 to Day 28, there was a slight increase in strength, by an amount of 10.66%. These findings have significant scientific implications for understanding the mechanisms of grouting reinforcement in micro-cracked rock masses.

Study on optimization of hydration process of blended cement

Research on Sustainable Development of Fine-Grained Material Cement Slurry

How Competitive Hydration between C 3 A and C 3 S in the Fast Dissolution Stage Affects the Hydration of Low-Heat Portland Cement Blended Pastes

Exploring the Influence Factors of Early Hydration of Ultrafine Cement

Hydration and microstructure evolution of a novel low-carbon concrete containing recycled clay brick powder and ground granulated blast furnace slag

Performance optimization and hydration mechanism of a clinker-free ultra-high performance concrete with solid waste based binder and steel slag aggregate

Improvement of the Hydration Kinetics of High Ferrite Cement: Synergic Effect of Gypsum and C 3 S–C 4 AF Systems

Factors Influencing the Hydration, Dimensional Stability, and Strength Development of the OPC-CSA-Anhydrite Ternary System

Optimization design and microstructure analysis of ultra-high performance cement-based composites

Study on Strength and Microstructure of Cement-Based Materials Containing Combination Mineral Admixtures

EXPERIMENTAL STUDY OF CEMENT PARTICLE SIZE EFFECT ON HYDRATION PROCESS OF CONCRETE

Effect of water/binder ratio and temperature on the hydration heat and properties of ternary blended cement containing slag and iron tailing powder

The Synergistic Effect of Calcained Coal-Series Kaolinite and Limestone on the Hydration of Portland Cement

Recent Development on Understanding Cement Hydration Mechanism and Effects of Chemical Admixtures on Cement Hydration

Optimization on overall performance of Modified Ultrafine Cementitious Grout Materials (MUCG) and hydration mechanism analysis

Influence of Mechanical Grinding on Pozzolanic Characteristics of Circulating Fluidized Bed Fly Ash (CFA) and Resulting Consequences on Hydration and Hardening Properties of Blended Cement

Optimization design and mechanical properties of multi-component ecological gelling materials

Tuning the Hydration Acceleration Efficiency of Calcium Carbonate by Pre-Seeding with Calcium Silicate Hydrate

Formulation of low clinker blended cements and concrete with enhanced fresh and hardened properties

Effects of Mineral Admixtures and Superplasticizer on Controlling Hydration Heat of Cementitious Materials

Effect of organic alkali on hydration of GGBS-FA blended cementitious material activated by sodium carbonate