Abstract:A theory that explains the operating pressures where liquid injection processes transition from exhibiting classical two-phase spray atomization phenomena to single-phase diffusion-dominated mixing is presented. Imaging from a variety of experiments have long shown that under certain conditions, typically when the pressure of the working fluid exceeds the thermodynamic critical pressure of the liquid phase, the presence of discrete two-phase flow processes become diminished. Instead, the classical gas-liquid interface is replaced by diffusion-dominated mixing. When and how this transition occurs, however, is not well understood. Modern theory still lacks a physically based model to quantify this transition and the precise mechanisms that lead to it. In this paper, we derive a new model that explains how the transition occurs in multicomponent fluids and present a detailed analysis to quantify it. The model applies a detailed property evaluation scheme based on a modified 32-term Benedict-Webb-Rubin equation of state that accounts for the relevant real-fluid thermodynamic and transport properties of the multicomponent system. This framework is combined with Linear Gradient Theory, which describes the detailed molecular structure of the vapor-liquid interface region. Our analysis reveals that the two-phase interface breaks down not necessarily due to vanishing surface tension forces, but due to thickened interfaces at high subcritical temperatures coupled with an inherent reduction of the mean free molecular path. At a certain point, the combination of reduced surface tension, the thicker interface, and reduced mean free molecular path enter the continuum length scale regime. When this occurs, inter-molecular forces approach that of the multicomponent continuum where transport processes dominate across the interfacial region. This leads to a continuous phase transition from compressed liquid to supercritical mixture states. Based on this theory, a regime diagram for liquid injection is developed that quantifies the conditions under which classical sprays transition to dense-fluid jets. It is shown that the chamber pressure required to support diffusion-dominated mixing dynamics depends on the composition and temperature of the injected liquid and ambient gas. To illustrate the method and analysis, we use conditions typical of diesel engine injection. We also present a companion set of high-speed images to provide experimental validation of the presented theory. The basic theory is quite general and applies to a wide range of modern propulsion and power systems such as liquid rockets, gas turbines, and reciprocating engines. Interestingly, the regime diagram associated with diesel engine injection suggests that classical spray phenomena at typical injection conditions do not occur.

Intensification Of Phase Transition On Multiphase Reactions

Research on the Design and Application of Efficient Catalysts Based on Interfacial Chemistry: Molecular Catalysts in Gas-Liquid Mixed Systems

An Innovative Reaction Heat Offset Operation for a Multiphase Fixed Bed Reactor Dealing with Volatile Compounds

Simulating a Multiphase Reactor with Continuous Phase Transition

Seeking Synergistic Effect—a Key Principle in Process Intensification

Thermo-regulated Water-Organic Biphasic System for Phenol Catalytic Hydrogenation

Overview of microinterface intensification in multiphase reaction systems

Multiphase flow and multicomponent reactive transport study in the catalyst layer of structured catalytic packings for the direct hydration of cyclohexene

Coupling droplets/bubbles with a liquid film for enhancing phase-change heat transfer

Regulation of catalytic reaction via vapor-phase condensation. 2. Operational realization in a two-stage reactor

Experimental and Numerical Studies of the Phase-Transfer-Catalyzed Wittig Reaction in Liquid–Liquid Slug-Flow Microchannels

Liquid-phase oxidation of cyclohexane with air in a microreactor: Kinetics and process intensification

Regulation of catalytic reaction via vapor-phase condensation. 1. Experimental study on the reaction rate hysteresis loops

Preparation and catalytic performance of active metal sintered membrane reactor anchored with Pt atoms

Global kinetics of reaction accompanied by partial internal wetting of catalysts

Study on the Laws of Methanol Reforming Coupled with Flow, Heat and Mass Transfer Processes with Variable Catalyst Distribution in Microchannels

Process Intensification of Mixing and Chemical Modification for Polymer Solutions in Microreactors Based on Gas-Liquid Two-Phase Flow

On the transition between two-phase and single-phase interface dynamics in multicomponent fluids at supercritical pressures

Controlling composition of coexisting phases via molecular transitions

Enhanced catalytic reaction at an air–liquid–solid triphase interface

Numerical Simulation of the Gas–Solid Two-Phase Flow-Reaction Process in a Maximizing Isoparaffin Process Reactor