Effect of Chlorine Salt on Durability of Mineral Admixture Concrete under Different Conditions
Xupeng Chen,Zhuowen Sun,Jianyong Pang
DOI: https://doi.org/10.32604/jrm.2022.019404
IF: 2.115
2022-01-01
JOURNAL OF RENEWABLE MATERIALS
Abstract:Mineral admixture concrete is a renewable material. It requires less cement than ordinary concrete and is thus beneficial for economical use of resources and environmental protection. To examine the impact of chloride salt on the durability of mineral admixture concrete under various conditions, in this study, test blocks are divided into two major groups: in one group, the test block is eroded by chloride salt on the interior and by sulphate/magnesium salts on the exterior, and in the second group, the test block is eroded by external chloride/sulphate/magnesium salts. Clean water is considered the control group. Dry-wet alternation tests are carried out to investigate the mechanical properties, mass, macromorphology, and ion content of the concrete. Furthermore, a series of methods, such as XRD, FT-IR, SEM, and EDS, are adopted to examine the phase composition and micromorphology of the concrete. The results show that, for the concrete subjected to the corrosion of internal chloride salt and external sulphate/magnesium salts (0–20 cycles), its mechanical properties improve slowly at the initial stage, but at the final stage (80–120 cycles), it is subjected to more severe corrosion compared to those only eroded by a single corrosive ion, such as the chloride/sulfate/magnesium salts. For concretes subjected to external corrosion of chloride/sulphate/magnesium salts, the concrete durability enhances with the concentration increase of the chloride salt. Mg2+ and SO42- could jointly result in destructive damage to the admixture concrete, main generating corrosion products of ettringite, gypsum, Mg(OH)2, thaumasite, and M-S-H.
materials science, composites,polymer science,green & sustainable science & technology