Abstract:The incorporation of supplementary cementitious materials (SCMs) in concrete can improve the properties of concrete partially immersed in salt solution. However, the current partial immersion environment only considers the capillary action above the still water level, does not consider the capillary action above the fluctuating water level in dry-wet cycling environment. In this paper, a series of indoor exposure experiments were carried out to investigate the effects of incorporating polynary SCMs including fly ash (FA), ground granulated blast furnace slag (GGBFS) and silica fume (SF) on the sulfate resistance and chloride impermeability of concrete considering the capillary action above the fluctuating water level in dry-wet cycling environment. A total of 15 groups of concrete with different mix proportions (total 150 concrete specimens) were designed to study the effects of different replacement levels of polynary SCMs on concrete properties. The effects of incorporating polynary SCMs on the chloride impermeability of concrete above and in the fluctuating water level zone were investigated. The scanning electron microscope (SEM), x-ray diffraction (XRD) and mercury intrusion porosimetry (MIP) tests were used to analyze the microstructure of concrete. The results indicate that when concrete is incorporated with polynary SCMs and subjected to capillary action above the fluctuating water level, the compressive strength and chloride impermeability first increase and then decrease with the increase of FA content; the compressive strength and chloride impermeability decrease with the increase of GGBFS content; the compressive strength first increase and then decrease with the increase of SF content, and the chloride impermeability increase with that. The transport process of chloride in concrete above the fluctuating water level zone includes the longitudinal transport under capillary action and the transverse transport under concentration gradient action. The combined effects of both cause the higher chloride concentration in concrete above the fluctuating water level zone. Comprehensively considering the influence of different mix proportions on the sulfate resistance and chloride impermeability of concrete, it is determined that 20% FA + 5% SF is the optimal replacement level with the excellent performance considering the capillary action above the fluctuating water level in dry-wet cycling environment.

EFFECT OF CYCLIC NaCl SOLUTION IMMERSION CURING ON THE MECHANICAL PROPERTIES OF PLAIN CONCRETE

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Chloride Penetrating under Co-Effects of Initial Curing and Exposure Conditions

Effect of Curing Conditions on Property of High Performance Concrete with Composite Mineral Admixture

Effects of incorporating polynary SCMs on sulfate resistance and chloride impermeability of concrete considering capillary action in dry-wet cycling environment

Co-effects of initial and exposure environments on chloride penetration

Chloride Ingress Profiles and Binding Capacity of Mortar in Cyclic Drying-Wetting Salt Fog Environments

Chloride penetration in concrete exposed to cyclic drying-wetting and carbonation

Influence of curing conditions on properties of Normal and high strength concrete with and without pre-wetted lightweight aggregates

Influence of Flexural Loading on Chloride Ingress in Concrete Subjected to Cyclic Drying-Wetting Condition

Experimental study on the capillary absorption of cement-based materials and analysis of influencing factors

Chloride Ingress in Internally Cured Concrete under Complex Solution

Effect of Chlorine Salt Content on the Microstructural Development of C-S-H Gels and Ca(OH)2 at Different Curing Temperatures

Effect of steam curing on strength, durability and microstructure of concretes with and without mineral admixtures

Effect of further water curing on compressive strength and microstructure of CO2-cured concrete

Ion transportation properties of cement-based material under standard curing and steam curing

Study on the Effect of Citric Acid-Modified Chitosan on the Mechanical Properties, Shrinkage Properties, and Durability of Concrete

Application of calcined clay in cast-in-situ concrete for saline areas: the experimental study on degradation behavior

Effects of Curing Regimes on Strength Development of High-Strength Concrete

The effect of curing regimes on the hydration products of lightweight ultra-high performance concrete: From experiments to MD simulations

Effect of curing regime on the strength development and microstructure evolution of high strength concrete