Abstract:Studies on the relationship between resistivity and dynamic rheological properties of carbon black-filled high-density polyethylene (CB/HDPE) composites were carried out. Change of resistivity rho is associated with the dynamic modulus before the positive temperature coefficient/negative temperature coefficient (PTC/NTC) temperature. When the temperature approaches the melting point of HDPE, rho increases rapidly with a decreasing modulus, corresponding to PTC transition. The resistivity-dynamic viscoelasticity relationship in the PTC region can be divided into two parts in which the changes of rho with storage modulus G' and loss modulus G" can be described by the scaling laws given by the critical storage modulus and loss modulus G' (c), and G" (c); adjustable parameters rho'(1c), rho'(2c), rho"(1c) and rho"(2c); and nonlinear exponents n and m, respectively. The accordance between the experimental data and the scaling functions of the dimensionless quantities (G'/G'(c) - 1) and (G"/G"(c) - 1) in the PTC transition region suggests that the rho jump may be the result of a modulus-induced percolation. G'(c) and G"(c) increase, but the four scaling resistivitis, rho'(1c), rho'(2c), rho"(1c), and rho"(2c), decrease with increasing CB concentration, implying that the microstructure change of the composites is the determinant factor for the PTC behavior and the resistivity-dynamic modulus relationship. However, rho'(2c) and rho"(2c) exhibit no scaling dependence. It is suggested that a threshold concentration exists for the modulus of the composites on the basis of examining the plot of both G'(c) and G"(c) against CB concentration. The scaling laws G' similar to Phi(x) and G" similar to Phi(y) hold for the concentration dependence of the critical modulus when Phi > Phi(c) and the estimated values of x and y are 1.10 +/- 0. 10 and 0.89 +/- 0.29, respectively. The resistivity-dynamic modulus can shift to form a master curve. The horizontal factors a(G') and a(G") and the vertical factors a' and a" are relevant to the concentration dependence of the dynamic modulus or PTC behavior. It is believed that the former would be involved in changing the mechanical microstructure formed by the complicated interaction of CB particle and polymer segments, and the latter would be involved in the overall changes of conducting a network during the PTC transition region. (C) 2003 Wiley Periodicals, Inc.

On Time-Temperature-Concentration Superposition Principle for Dynamic Rheology of Carbon Black Filled Polymers

Rheological Behavior of Carbon Black Filled Polystyrene Melts

Time-concentration Superpositioning Principle Accounting for the Reinforcement and Dissipation of High-Density Polyethylene Composites Melts

Time-Concentration Superpositioning Principle Accounting for Reinforcement and Dissipation of Multi-Walled Carbon Nanotubes Filled Polystyrene Melts

DYNAMIC RHEOLOGICAL BEHAVIOR OF SSBR/SiO2 COMPOUNDS

Time-concentration Superpositioning Principle Accounting for the Size Effects of Reinforcement and Dissipation of Polymer Nanocomposites

Viscoelastic Effects on the Phase Separation in Thermoplastics Modified Cyanate Ester Resin

Simultaneous Measurement of Resistance and Viscoelastic Responses of Carbon Black‐filled High‐density Polyethylene Subjected to Dynamic Torsion

Linear Rheology of Carbon Black Filled Polystyrene

Viscoelastic Damping Performance And Rheological Behaviour Of Cup-Stacked Carbon Nanotube Modified Epdxy Nanocomposites With Re-Agglomeration Network

Dynamic rheological behavior of ssbr/si02 compounds

Time–Concentration Superposition for Linear Viscoelasticity of Polymer Solutions

Study on Time-Dependent Resistance of Carbon Black-Loaded High-Density Polyethylene Composites During the Isothermal Course

Annealing-Induced Rheological and Electric Resistance Variations in Carbon Black-Filled Polymer Melts

Effects of Concentration and Temperature on Mechanical Properties of Tatb/Pctfe Pbx by Molecular Dynamics Simulation

STUDY ON CORRELATION BETWEEN RHEOLOGICAL AND CONDUCTIVE BEHAVIOR THROUGH SIMULTANEOUS MEASUREMENTS DURING ISOTHERMAL CRYSTALLIZATION FOR CARBON BLACK FILLED ISOTACTIC POLYPROPYLENE

Relationship Between the Positive Temperature Coefficient of Resistivity and Dynamic Rheological Behavior for Carbon Black‐filled High‐density Polyethylene

DYNAMIC RHEOLOGICAL PROPERTIES OF POLYSTYRENE/MULTI-WALLED CARBON NANOTUBES COMPOSITES

Studies on the Steady and Dynamic Rheological Properties of Poly(dimethyl‐siloxane) Filled with Calcium Carbonate Based on Superposition of Its Relative Functions

Dynamic Rheological Properties for HDPE/CB Composite Melts

Influence of Annealing on Rheological and Conductive Behaviors of High-Density Polyethylene/carbon Black Composites