Abstract:This study delves into the ductile damage mechanism via exploring the intrinsic nature of the transformation of void and strain localization induced damages. In tandem with this, tensile experiments were conducted by using ductile metals of pure titanium and austenite steel with different grain sizes ( d ̄ ) and sample thicknesses ( t ). Various damage behaviors were generated: the void damage ( Dv ) in which the damage is induced by voids and their evolution, the strain localization induced damage ( Dl ) in which damage is controlled by localized deformation, and their mixed mode. Examinations of damage characteristics show a transformation from Dl to Dv with the increase of t/d ̄ or hardening. To identify the decisive factor behind the mechanism, crystal plasticity finite element simulations were performed, and the grain-level non-homogeneous deformation was carefully examined. The materials with severe inhomogeneous deformation were found to have fewer voids, while the ones with more uniform deformation possessed evident void growth. Deformation heterogeneity was thus identified as a pivotal factor for the Dl - Dv transformation. The change of micro-defect configuration of void and grain boundary (GB) with deformation heterogeneity was discovered to be the underlying cause. In the Dv case, the large number of strain localization zones penetrating within the bulk promotes void nucleation and growth from vacancies and dislocations. The Dl case, on the other hand, gets more new GBs but smaller number of voids during deformation. The larger continuous strain localization zone facilitates the dislocation-consuming process of GB formation, resulting in the difficulty of void formation. Additionally, a characteristic parameter representing the deformation heterogeneity degree was defined. A Dl - Dv paradigm, which involves the change of damage mode and micro-defect configuration with deformation heterogeneity, and the characteristic parameter was established. The paradigm was validated to have a wide applicability with its efficiency in interpreting extensive damage phenomena. These explorations are expected to add new insights into the understanding of damage mechanism and support the development of a unified damage prediction platform.

Experimental investigation into plastic damage of microvoids with interaction

Development of local plasticity around voids during tensile deformation

Unraveling the transformation of ductile damage mechanisms of void evolution and strain localization based on deformation heterogeneity

Effects of void shape and location on the fracture and plastic deformation of Cu (crystalline) /Cu 64 Zr 36 (amorphous) composites

A unified model for yield strength and plastic behavior of nanovoid evolution in tungsten based on molecular dynamics simulations

Modelling the effects of void swelling and spatial heterogeneity on the fracture of metallic materials by crystal plasticity

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Molecular dynamics simulation on plasticity deformation mechanism and failure near void for magnesium alloy

Study of Plastic Shear Localization Via the Flow Theory of Mechanism-Based Strain Gradient Plasticity

Effect of microvoids on microplasticity behavior of dual-phase titanium alloy under high cyclic loading (I): Crystal plasticity analysis

Coupled crystal plasticity and micromechanics damage model based on viscoplastic self-consistent theory and X-ray computed tomography

Cylindrical Void in a Rigid-Ideally Plastic Single Crystal. Part I: Anisotropic Slip Line Theory Solution for Face-Centered Cubic Crystals

Machine learning atomic dynamics to unfold the origin of plasticity in metallic glasses: From thermo- to acousto-plastic flow

In-situ Three-dimensional Investigation on Micro Ductile Fracture Mechanism of Mild Steel

A study of the void size effect based on the Taylor dislocation model

The Effect of Nucleation Time on the Growth of a Microvoid in a Viscoelastic Material

Interaction of void spacing and material size effect on inter-void flow localisation

A novel model to predict microvoid evolution in tensile necking using macroscopic deformation behavior

Statistical Evolution of Microvoids in Particle-Filled Polymers under Plate Impact

Experimental Evaluation of Microvoid Characteristics and Relationship with Stress and Strain for Ductile Fracture

Direct Experimental Evidence of Nano-Voids Formation and Coalescence Within Shear Bands