Abstract:Niobium (Nb) is mainly added to low-carbon steels, in which the main microstructure is ferrite and/or bainite, to refine grains and improve their properties. However, the studies on Nb in high-carbon pearlitic steels are insufficient, and there are some debates regarding the existing studies. High-carbon pearlitic steel is widely used in bars, wires, and steel rails. The role of Nb in high-carbon steels may differ for different steel grades and under different heat treatments. Hence, further detailed studies are required to improve the properties of high-carbon pearlitic steels. In this study, two series of high-carbon pearlitic steels (68C and 75C series) were designed and subjected to isothermal pearlite transformation at different austenitization and isothermal transformation temperatures. The microstructures and mechanical properties of the steels were investigated by optical microscopy, field-emission scanning electron microscopy, electron backscatter diffraction, scanning transmission electron microscopy, and hardness tests. The results showed that the pearlite lamellae were refined by the addition of Nb to high-carbon pearlitic steels, which was attributed to the solute drag effect of Nb. The pearlite colony and nodule sizes also became finer with the addition of Nb because of the finer prior austenite grains and smaller pearlite growth rates. However, the refinement of the pearlite lamellae, nodules, and colonies by the addition of Nb was not significantly enhanced by increasing the Nb content from 0.014 wt% to 0.027 wt% in 75C series samples. In addition, the pearlite interlamellar spacing and colony and nodule sizes of the samples decreased with decreasing isothermal and austenitization temperatures. Moreover, the addition of Nb to high-carbon steels increased their hardness and yield strength. The main strengthening mechanisms of Nb in high-carbon steel are grain refinement strengthening and precipitation strengthening in the samples austenitized at 900 °C, whereas the improvement of strength is mainly attributed to grain refinement strengthening in the samples austenitized at 1180 °C. This study systematically characterized the pearlite morphology of Nb microalloyed high-carbon steels and analyzed the strengthening mechanism, providing a theoretical reference for the development of Nb-containing high-carbon pearlitic steels.

Research on Microstructure and Properties of Nb-Microalloyed Low Carbon Steel Produced by Strip Casting

Effects of niobium and heat treatment on microstructure and mechanical properties of low carbon cast steels

Influence of Thermo-Mechanical Process and Nb-V Microalloying on Microstructure and Mechanical Properties of Fe–Mn–Al–C Austenitic Steel

Study on the Effect of Long Holding Time on Improving the Microstructure and Mechanical Properties of Nb Microalloyed Steels

The Performance of Niobium-Microalloying Ultra-High-Strength Bridge Cable Steel during Hot Rolling

Study of Microstructure and Stretch-Flange-Formability of Low Carbon FB Steel With Niobium

Effect of Nb contents on microstructure characteristics and yielding behavior of Fe–4Mn–2Al-0.2C steel

Effect of Carbon on the Microstructure Evolution and Mechanical Properties of Low Si-Containing Centrifugal Casting 20cr32ni1nb Alloy

Microstructure and mechanical properties of a 2 wt% Nb bearing low carbon steel

The impact of niobium on the microstructure, texture and magnetic properties of strip-cast grain oriented silicon steel

Eutectic precipitates and microstructure of electroslag remelted 15Cr–22Ni austenitic heat-resistant steel with varying Nb contents

Effect of Annealing Time on Microstructure and Mechanical Properties of Cold-Roled Niobium and Titanium Bearing Micro-aloyed Steel Strips

Study on high temperature mechanical properties of niobium microalloyed cold heading steel

Microstructure and mechanical properties of Nb microalloyed high‐carbon pearlitic steels subjected to isothermal transformation

Microstructure evolution and quantitative analysis of mechanical properties of cold-rolled low carbon niobium steel

The effect of Ti–Mo–Nb on the microstructures and tensile properties of a Fe–Mn–Al–C austenitic steel

Effect of Nb Content on Microstructure and Mechanical Properties of K4169-Type Superalloy

Effects of Niobium on the Strength and Toughness of Low-Chromium High-Boron Cast Iron

Enhanced Mechanical Properties in a Low-Carbon Ultrafine Grain Steel by Niobium Addition

Effect of Rare Earth Elements on Microstructure and Tensile Behavior of Nb-Containing Microalloyed Steels

Microstructure and mechanical properties of a Cu-Fe-Nb alloy with a high product of the strength times the elongation