Abstract:During five-axis cutting, the unreasonable selection of the tool’s diameter and processing width will greatly affect processing efficiency. However, the existing tool’s diameter and processing width values avoid local over-cutting, which is conservative. Therefore, a calculation method of optimal cutting diameter and processing width based on machining interference surface with flat-end cutter as the research object is proposed in this paper. First, the offset surface of discrete points is constructed as the machining interference surface based on the implicit surface theory. The surface offset is the maximum allowable machining error. Then, according to the Dupin indicatrix line between the tool and the machining surface, sufficient and necessary conditions for the local malleability of the flat-end cutter are obtained. Based on the constructed machining interference surface, the optimal diameter of the tool is calculated via the effective cutting profile curve of the tool at the interference surface. Next, the next cutter contact point is obtained by intersecting the tangent line between the cutter contact point and the upper or lower limit surface of the machining interference surface and the cutting path curve. The processing width is calculated according to the distance between the two adjacent cutter contact points. Finally, the proposed algorithm is verified by CAM software simulation and experiments by taking a complex surface as an example. The experimental results show that the optimization algorithm of the tool’s diameter and bandwidth under the constraint of machining interference surface can shorten the machining time and obtain higher machining efficiency in the NC machining of complex surfaces.

Global Tool Interference Detection in Five-Axis Machining of Sculptured Surfaces

Local Interference Detection and Avoidance in Five-Axis Nc Machining of Sculptured Surfaces

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Oriented Bounding Box and Octree Based Interference Detection Simplified Algorithm of Free-form Surfaces Machining

An accurate surface error optimization for five-axis machining of freeform surfaces

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

An Interference-and-chatter-free Tool Orientation Planning Method for Five-Axis NC Machining.

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Approximate tool posture collision-free area generation for five-axis CNC finishing process using admissible area interpolation

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

Research On Feedrate Control Strategy For Sculptured Surfaces Machining With Five-Axis Cnc

Non-Interference Modeling of Honeycomb Part for Five-Axis Machining

Research on tool diameter and processing width optimization for highly efficient machining of complex surfaces constrained by machining interference surface

A feedback toolpath generation method for compound trimmed surface with machine’s dynamic characteristics confined

Fast Detection of Geometric Errors for Three-Axis Machine Tools with Combined Double-Ball Bars Based on Spatial Circle Detection

Tool Orientation Optimization Based on Spatial Tractrix Method for Five-Axis CNC Machining with Ball End Cutters

A generic uniform scallop tool path generation method for five-axis machining of freeform surface.

Improving Machined Surface Textures in Avoiding Five-Axis Singularities Considering Tool Orientation Angle Changes

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Contouring error control for high-speed and high-precision five-axis CNC machine tools

Collision-free Tool Motion Planning for 5-Axis CNC Machining with Toroidal Cutters