Abstract:The virtual fields method (VFM) is a novel highly efficient non-iterative tool for the identification of the constitutive parameters of materials. The VFM can obtain several constitutive parameters based on the full-field deformation of the specimen measured in a single test. However, the available results demonstrate that the accuracy of the identification result is strongly dependent on the quality of the deformation field, which is generally measured using optical methods. Especially, in the case where a small deformation is applied under elastic loading, the image noise and measurement error will exhibit a significant influence on the identification results. By combining the VFM with moiré interferometry (MI), a MI-based VFM is used to identify the parameters of an orthotropic linear elastic material. A numerical experiment is conducted to examine the feasibility of this method. From the analysis results, we determine that two factors exhibit an influence on the identification accuracy. The reinforcement direction of the orthotropic material is one factor, and the other is the noise in the deformation field. This MI-based VFM is then applied to determine the mechanical parameters of a unidirectional carbon fiber composite material. In the measurement, a three-point bending load is applied to the specimens. A high density grating with a frequency of 1200line/mm grating is replicated on the specimen surface and used for measuring the in-plane deformation fields using a moiré interferometer. The obtained deformation fields are taken as the inputs of the VFM identification process, and the elastic properties of the materials are identified. The obtained results verify the advantage of the proposed method with respect to high accuracy and good noise immunity.

Application of Virtual Displacement Field for the Mechanical Property Measurement of Graphite Material

A Virtual Scale Approach to Multi-Scale Calculations and Its Application in Fiber-Reinforced Composites

Virtual fields method coupled with moiré interferometry: Special considerations and application

Characterization of Mechanical Properties of 3-D–printed Materials Using the Asymmetric Four-Point Bending Test and Virtual Fields Method

Application of Moiré Interferometry to the Characterization of Orthotropic Materials in the Antisymmetric Configuration Using the Virtual Fields Method

Identification of the Elastic Stiffness of Composites Using the Virtual Fields Method and Digital Image Correlation

Characterization of Material Mechanical Properties Using Strain Correlation Method Combined with Virtual Fields Method

Parameters Measurement of Nuclear Graphite Based on Digital Image Correlation

Characterization for elastic constants of fused deposition modelling-fabricated materials based on the virtual fields method and digital image correlation

A Computational Method for the Determination of the Elastic Displacement Field using Measured Elastic Deformation Field

A 2D mark shearing technique for characterizing the mechanical properties of material

Machine-learning-based virtual fields method: Application to anisotropic hyperelasticity

A Novel Topography and Elasticity Synchronous Measure Approach With an AFM

An identification method of mechanical properties of materials based on the full‐field measurement method based on the fringe pattern

Inertia-based identification of elastic anisotropic properties for materials undergoing dynamic loadings using the virtual fields method and heterogeneous impact tests

Study on rapid 3D full-field deformation&strain measurement and inspection for mechanical engineering and material mechanical properities

Numerical and Experimental Studies on the Heterogeneous Mechanical Characteristics of the Laser Repaired Components

Displacement fields denoising and strains extraction by finite element method

Measuring forces in a 2D multi-contact system using the virtual fields method: Principle, simulations and experimental application to a three-particle system

Novel Instrument for Characterizing Comprehensive Physical Properties under Multi-Mechanical Loads and Multi-Physical Field Coupling Conditions.

Measuring Mechanical Properties of the 3D Carbon/Carbon Composite Using Automated Grid Method