Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. Discontinuous-long-fibre (DLF) composites fabricated from pre-impregnated unidirectional (UD) fibre chips are susceptible to structural deficiency. The in-plane highly anisotropic mechanical properties of the chips combined with the random nature of fibre orientation causes local weaknesses within the material when fibres are perpendicular to the load. Recent experimental results have shown that using woven-fibre chips could improve the performance of DLF composites by increasing their average mechanical properties and reducing their variability. To better understand the underlying phenomenon giving an advantage to the woven chips, a finite element model was developed to predict the mechanical properties obtained from a standard tensile test. DLF chips were modelled based on a voxel method where random chip positions were generated by an algorithm developed in this work. ANSYS® software was utilized to model the non-linear response associated with progressive damage of the composite. The maximum stress and the Puck failure criteria were employed to define damage initiation for the woven and UD fibres, respectively. Tensile modulus predictions for both types of chips showed good results when compared to experimental data. Strength predictions for the UD fibres also showed good correlation with experimental results, but the model overestimated the strength of the woven-fibre DLF composite. It appeared that the failure of the UD-fibre composites was associated with matrix failure (transverse tension and in-plane shear). Woven-fibre composites, however, showed damage modes linked to both fibre failure (longitudinal tension) and matrix failure (transverse tension and in-plane shear).

Efficient Approach to the Structure-Property Relationship of Woven and Braided Fabric-reinforced Composites Up to Failure

Progressive failure analysis of 2D woven composites at the meso-micro scale

A Finite Element Model for Failure Analysis of 3D Braided Composites

Failure Analysis of 3D Woven Composites under Tension Based on Realistic Model

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

A multi-scale finite element method for failure analysis of three-dimensional braided composite structures

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model

An Innovative Micromechanics-Based Multiscale Damage Model of 3D Woven Composites Incorporating Probabilistic Fiber Strength Distribution

Multi-scale Progressive Failure Simulation of 3D Woven Composites under Uniaxial Tension

Progressive Damage and Failure Analysis of Three-Dimensional Braided Composites under Multiaxial Loadings

Parametric theoretical prediction of elastic properties and strength of fine weave pierced C/C composites

A Multi-Scale Stochastic Fracture Model for Characterizing the Tensile Behavior of 2D Woven Composites

Hierarchical Multi-Scale Analysis of the Effect of Varying Fiber Bundle Geometric Properties on the Mechanical Properties of 3D Braided Composites

Modeling and analysis of failure initiation and progression of 3D braided composites: a multi-region multi-cell approach

Damage failure analysis of flexible-oriented three dimensional woven composites with void defects: An experimental and numerical study

Numerical Modeling of 3D Woven Hybrid Composites for Stiffness and Strength Prediction

A Coupled Elastoplastic-Damage Analytical Model for 3D Resin-Matrix Woven Composites

An Analytical Nonlinear Model for Plain-Woven Composites under Off-Axis Loads

An MMF3 Criterion Based Multi-Scale Strategy for the Failure Analysis of Plain-Woven Fabric Composites and Its Validation in the Open-Hole Compression Tests.

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder