Abstract:In recent years, the research of hybrid composites reinforced by multiple reinforcements has received increasing attention because these composites have great potential to be tailored for various applications. In the present work, hybrid aluminum (Al) matrix composites reinforced with SiC particles and carbon fibers (SiCp-Cfs/Al composites) were fabricated by the colloidal dispersion and suction filtration method. It was found that SiCp-Cfs/Al composites had a dense structure and the carbon fibers and SiC particles were uniformly distributed in the Al matrix. The mechanical properties of SiCp-Cfs/Al composites with different reinforcement volume fractions were investigated. The results showed that the SiCp-Cfs/Al composites exhibited high tensile strength and elastic modulus (tensile strength 207 MPa and elastic modulus 92 GPa) when the volume fraction of SiC particles was 5% and the volume fraction of carbon fiber was 7%, which were significantly higher than that of SiCp/Al composites with 5% volume fraction of SiC particles (tensile strength 112 MPa and elastic modulus 80 GPa). The homogeneous distribution of carbon fibers and SiC particles in the Al matrix, which serves as co-reinforcing, is responsible for the high tensile strength and elastic modulus of SiCp-Cfs/Al composites. The coefficient of thermal expansion (CTE) of SiCp/Al composites and SiCp-Cfs/Al composites were measured at temperatures ranging from 25 °C and 400 °C. The results showed that the addition of carbon fibers caused the CTE of SiCp-Cfs/Al composites to be much lower than that of SiCp/Al composites.

Thermal Expansions and Mechanical Properties of Al/C and Al/(SiC+C) Composites Based on Wood Templates

Microstructures and thermal properties of aluminum matrix composites based on wood templates

The Fabrication and Thermal Properties of Al/C and Al/(SiC+C) Composites with Wood Structures

Thermal Conductivity and Thermal Expansions of Aluminum/carbon Composites Based on Wood Templates

Preparation and Thermal Properties of Metal Matrix Composites with Wood-Structure

Thermal properties aluminum/carbon composites with wood structure

The fabrication and wear properties of C/Al and (C + SiC)/Al composites based on wood template

Fabrication and mechanical properties of AI/C composites based on wood templates

Preparation and Thermal Properties of Aluminum Matrix Composites with Plant Structure

Manufacture of Aluminum/Carbon Composites Based on Wood Templates

Fabrication and the Wear Behaviors of the Carbon/aluminum Composites Based on Wood Templates

Mechanical and thermal expansion behavior of hybrid aluminum matrix composites reinforced with SiC particles and short carbon fibers

The fabrication of composites with interpenetrating networks based on woodceramics

Tailoring the thermophysical properties of porous SiC framework reinforced Al-Mg-Si composites by Si alloying content for thermal energy management

Improving mechanical and thermal expansion properties of aluminum matrix composites reinforced by silicon carbide fiber

Effects of SiC Content on the Mechanical and Thermophysical Properties of 3D Cf/SiC–Al Composites

Thermophysical Properties of SiC/Al Composites with Three Dimensional Interpenetrating Network Structure

Thermal and Mechanical Properties of SiCp/Al Composite for Space Application

Wood‐Derived, Vertically Aligned, and Densely Interconnected 3D SiC Frameworks for Anisotropically Highly Thermoconductive Polymer Composites

Interface and Thermal Expansion of Carbon Fiber Reinforced Aluminum Matrix Composites

Thermal physical properties of squeeze casting SiCw/Al composite