Abstract:Wood ceramization is a promising preparation technology. Ceramics made from natural wood can retain the original structural characteristics and unique microstructure of the wood, and also offer acceptable mechanical properties and wear resistance. In this study, the ceramization process of natural poplar wood is optimized. Three-dimensional silicon carbide prepared by ceramization of wood is used to strengthen high-chromium cast iron, and three-dimensional silicon carbide reinforced high-chromium cast iron (3D-SiC/HCCl) composite materials are obtained. The results demonstrate that the treated wood retained acceptable network structure and uniform pore size after ceramization. Based on the size, the pores can be classified into smaller pores (approximately 8 mu m), medium-sized pores (20-40 mu m), and larger pores (100-300 mu m). The 3D-SiC/HCCl composites, obtained by casting and infiltrating these pore channels, show continuous network-like interpenetrating structures in space. The wear resistance of the 3D-SiC/HCCl composite materials was investigated and compared with high-chromium cast iron. The results indicate that under the same friction condition, the wear resistance of the composites is significantly improved, and the abrasion loss is reduced from 3.8% to 0.32%. The three-dimensional silicon carbide in the composites produces a shadow effect during friction, which can provide acceptable support and protection for the high-chromium cast iron matrix.

Preparation and Thermal Properties of Metal Matrix Composites with Wood-Structure

Microstructures and thermal properties of aluminum matrix composites based on wood templates

The Fabrication and Thermal Properties of Al/C and Al/(SiC+C) Composites with Wood Structures

Thermal properties aluminum/carbon composites with wood structure

Thermal Expansions and Mechanical Properties of Al/C and Al/(SiC+C) Composites Based on Wood Templates

Preparation and Thermal Properties of Aluminum Matrix Composites with Plant Structure

Thermal Conductivity and Thermal Expansions of Aluminum/carbon Composites Based on Wood Templates

Fabrication and mechanical properties of AI/C composites based on wood templates

The fabrication and wear properties of C/Al and (C + SiC)/Al composites based on wood template

Manufacture of Aluminum/Carbon Composites Based on Wood Templates

The fabrication of composites with interpenetrating networks based on woodceramics

Fabrication and the Wear Behaviors of the Carbon/aluminum Composites Based on Wood Templates

WOODCERAMICS COMPOSITES WITH INTERPENETRATING NETWORK

Microstructure and Wear Properties of SiC Woodceramics Reinforced High-Chromium Cast Iron

Effect of preform structure on mechanical and thermal properties of SiCf/SiC composites

Preparation and Characterization of Wood Ceramics from Polyarylacetylene Resin/Fir Powde

Preparation, microstructure and properties of three-dimensional carbon/carbon composites withhigh thermal conductivity

Effect of preform structure on mechanical and thermal properties of SiC f /SiC composites

Preparation of Porous SiC Reinforced Metal Matrix Composites

Preparation and Mechanical Properties of Carbon/carbon Composites with High Textured Pyrolytic Carbon Matrix

Wood‐Derived, Vertically Aligned, and Densely Interconnected 3D SiC Frameworks for Anisotropically Highly Thermoconductive Polymer Composites