Abstract:High concentration coal water slurry (CWS) is a new type of coal based liquid fuel developed and applied to replace oil for direct use in industry since the mid-seventies. Industrial tests of coal water slurry combustion in the 20 tons per hour steam output and 60 tons per hour steam output oil fired boilers have been carried out since 1981 in China. Nowaday, a project of burning coal water slurry in the 230 T/H utility boiler in Baiyanghe power plant has been made and several of the retrofit works have been done. This is the first time in this country. The boiler was originally designed based on burning coal. Actually, it keeps on burning oil. It has a cross-section of high length-width ratio (the long-side and short-side are 10.1 m and 7.15 m respectively, the ratio is 1/1.3). Based on the demand of power plant authority and the particularity of boiler construction, the CWM burners must be arranged on two side walls which are shorter than the front and rear wall. As we know, the length-width ratio of cross-section in a tangential fired furnace is generally suggested to be no more than 1/1.25. However, the ratio of this furnace hasmore » already been 1/1.3. If calculating in terms of burner-located points on furnace walls, the length-width ratio is 1/2.13. This obviously contradicts with general suggestion. No furnace aerodynamic information about this arrangement can be found. This arrangement will cause easily the deflection and impingement of the airflow, and it is difficult to form a good airflow distribution. So the retrofitting and design of the burner on the old boiler are very important. For this purpose, the experimental researches in two cold model facilities were carried out carefully. The experimental projects reported in this paper include the aerodynamic characteristic of two shape burners.« less

Investigation and Application of “Bluff-body in Cavity” Burner for Pulverized Coal Combustion

Investigation Of Bluff-Body In Cavity Burner For Pulverized Coal Combustion

TEST STUDY ON OUTLET FLOW FIELD PERFORMANCE FROM WAVE-SHAPED COMBUSTION-STABILIZING BODY OF THE CONCENTRATION TUNABLE RICH/LEAN BURNERS

Numerical Investigation on Oxy-Combustion Characteristics of a 200 MWe Tangentially Fired Boiler

Experimental and Numerical Study of a Two-Stage Swirl Burner

Flow Characteristic Of A New Type Of Double-Channel Air Burner In Direct Flow Pulverized Coal Boiler

Recirculating Structures and Combustion Characteristics in a Reverse-Jet Swirl Pulverized Coal Burner

Experimental and numerical investigation on combustion performance of C shape burner in 3MW boiler

Numerical Simulation of the Aerodynamic Field of a New Type Bluff Body Steady Burner

A Bayesian Optimization Framework for the Control of Combustion Instability of a Bluff-Body Stabilized Combustor

Investigations into the Ignition Behaviors of Pulverized Coals and Coal Blends in a Drop Tube Furnace Using Flame Monitoring Techniques

Numerical investigation on combustion flow characteristics of a micro gas turbine swirl combustor with different protruded bluff body structures

ICOPE-15-C047 Dynamics of Non-premixed Flames with Modulations in the Air Flow for a Bluff-body Burner

97/03976 Researches on the aerodynamic characteristics of CWS tangentially arranged burners in utility boilers

Bluff-Body Flames in Hot and Diluted Environments

Influence of secondary air blade angle and oxygen-rich combustion characteristics of an improved Babcock swirl burner

Experimental and numerical study on a cavity-swirler-based combustion strategy for advanced gas turbine engine

Characteristics of Flame Modes for A Conical Bluff Body Burner with A Central Fuel Jet

Experimental Study on the Aerodynamic and Separating Characteristics of a Novel Tiny‐oil Ignition Cyclone Burner for Down‐fired Utility Boiler

Application of a Combustion Stabilization Cavity Coal Burner at Tangentially Anthracite Fired Boiler on Low Load

PDA research on a novel pulverized coal combustion technology for a large utility boiler