Numerical simulation of combustion characteristics of shale-gas burners
Yang Zhongqing,Guo Mingnü,Geng Haojie,Zhong Zhigang,Zhang Li
DOI: https://doi.org/10.3787/j.issn.1000-0976.2013.07.020
2013-01-01
Abstract:Recent studies have started not only to study the clean combustion features of shale gas but to design and optimize shale-gas burners. This will be of a great value to stimulate the wide application of shale gas. According to the unique properties of shale gas, we designed a 200 kW shale gas burner for a small-scale industrial furnace. The numerical simulation was adopted to discuss what impact the excess air coefficient (1.05-1.35) and the bluff body have on the combustion characteristics such as burning temperature distribution, combustion products, NO emission, etc. The following findings were concluded. a. With the increase of excess air coefficient, the peak temperature in the furnace decreases; when the excess air coefficient is rather higher, a high-temperature zone is easily formed at the bottom of the burner. b. Without a bluff body being installed, the amount of NO yield decreases with the increase of the excess air coefficient. c. When a bluff body is installed at the outlet of the gas pipe, the methane in shale gas can be completely consumed and the maximum furnace temperature declines; a backflow zone is also formed in the downstream of the bluff body, where the high-temperature flue gas will preheat the gushing gas, thus to reduce the ignition time. Comparatively, when the bluff body is installed, the combustion condition is stable and the burning temperatures are evenly distributed in the furnace; and the NO yield is rather low. Also, it is pointed out that the optimal combustion condition will be achieved when the excess air coefficient is 1.25.