Abstract:Multiwalled carbon nanotubes (MWNTs) have been widely used as nanofillers for polymer reinforcement. However, it has been restricted by the limited available interface area of MWNTs in the polymer matrices. Oxidation unzipping of MWNTs is an effective way to solve this problem. The unzipped multiwalled carbon nanotube oxides (UMCNOs) exhibit excellent enhancement effect with low weight fractions, but agglomeration of UMCNOs at a relatively higher loading still hampered the mechanical reinforcement of polymer composites. In this paper, we interestingly found that the dispersion of UMCNOs in polymer matrices can be significantly improved with the combination of pristine MWNTs. The hybrids of MWNTs and UMCNOs (U/Ms) can be easily obtained by adding the pristine MWNTs into the UMCNOs aqueous dispersion, followed by sonication. With a π-stacking interaction, the UMCNOs were attached onto the outwalls of MWNTs. The morphologies and structure of the U/Ms were characterized by several measurements. The mechanical testing of the resultant poly(vinyl alcohol) (PVA)-based composites demonstrated that the U/Ms can be used as ideal reinforcing fillers. Compared to PVA, the yield strength and Young's modulus of U/M-PVA composites with a loading of 0.7 wt % of the U/Ms approached ∼145.8 MPa and 6.9 GPa, respectively, which are increases of ∼107.4% and ∼122.5%, respectively. The results of tensile tests demonstrated that the reinforcement effect of U/Ms is superior to the individual UMCNOs and MWNTs, because of the synergistic interaction of UMCNOs and MWNTs.

Mechanical properties of ABOw+MWNTs/Al hybrid composites made by squeeze cast technique

Preparation of Novel Aluminum Hybrid Composite Containing Aluminum Borate Whiskers and Carbon Nanotubes

Microstructure and Mechanical Properties of ABOw and Nickel-Coated MWCNTs Reinforced 2024al Hybrid Composite Fabricated by Squeeze Casting

Fabrication and characteristic of Al-based hybrid composite reinforced with tungsten oxide particle and aluminum borate whisker by squeeze casting

Multi-wall Carbon Nanotubes Reinforced Aluminum Composites Synthesized by Hot Press Sintering and Squeeze Casting

The properties and microstructure of hybrid composites reinforced with WO3 particles and Al18B4O33 whiskers by squeeze casting

Preparation of MWNTs/Al2O3 Composites and Their Mechanical and Electrical Properties

Microstructures and mechanical properties of Al nanocomposites hybrid-reinforced with B4C, carbon nanotubes and graphene nanoplatelets

Morphological and Mechanical Properties of Bile Salt Modified Multi-Walled Carbon Nanotube/poly(vinyl Alcohol) Nanocomposites

Microstructures and Tensile Properties of Hot-Extruded Composite Bi 2 O 3 -Coated ABOw/Al Composite

Mechanical Effects of Carbon Nanotubes-Graphene Reinforced Aluminium Matrix Composites

The mechanical and impact properties of MWNTs/LDPE nanocomposites

Electrical, Mechanical, and Thermal Properties of Multiwalled Carbon Nanotube Reinforced Alumina Composites

Well-Dispersed Carbon Nanotubes for Greatly Enhanced Mechanical Properties of Alumina-Based Composites

Fabrication and Characteristics of (abow Plus Sicp)/6061al Composite by Semi-Solid Mechanical Stirring Technique

An Aluminum Borate Whisker-Reinforced Aluminum Matrix Composite with High Plasticity

Toughness Enhancement of Poly(methyl methacrylate) (PMMA)/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Nanocomposites by Multiwall Carbon Nanotubes (MWNT)

Enhanced Thermal Stability, Mechanical Properties and Structural Integrity of MWCNT Filled Bamboo/Kenaf Hybrid Polymer Nanocomposites

Strengthening and Deformation Mechanisms in Nanolaminated Single-Walled Carbon Nanotube-Aluminum Composites

Unzipped multiwalled carbon nanotube oxide/multiwalled carbon nanotube hybrids for polymer reinforcement.

Synergistic effect of Mn 2+ with unzipped carbon nanotubes on enhancement of mechanical properties of polyamide 66