Abstract:Due to the concerns about the depletion of fossil fuel sources and the deteriorating environment, the attempt to investigate the production of renewable energy will play a crucial role as a potential to alleviate the dependency on mineral fuels. One particular area of interest is generation of bio-oil through sewage sludge (SS) pyrolysis. SS can be a potential candidate in contrast to other types of biomasses due to its availability and low cost. However, the presence of high molecular weight hydrocarbons and oxygenated compounds in the SS bio-oil hinders some of its fuel applications. In this context, catalytic pyrolysis is another attainable route to upgrade bio-oil quality. Among different catalysts (i.e., zeolites) studied for SS pyrolysis, activated chars (AC) are eco-friendly alternatives. The beneficial features of AC derived from SS comprise the comparatively large surface area, porosity, enriched surface functional groups and presence of a high amount of metal species that can improve the catalytic activity. Hence, a sludge-based AC catalyst was fabricated in a single-step pyrolysis reaction with NaOH as the activation agent and was compared with HZSM5 zeolite in this study. The thermal decomposition and kinetics were invested via thermogravimetric analysis (TGA) for guidance and control of pyrolysis and catalytic pyrolysis and the design of the pyrolysis setup. The results indicated that the pyrolysis and catalytic pyrolysis contain four obvious stages and the main decomposition reaction occurred in the range of 200-600 °C. Coats-Redfern method was applied in the 2nd and 3rd devolatilization stages to estimate the reaction order and activation energy (E) from the mass loss data. The average activation energy (Em) values for the reaction orders n = 1, 2 and 3 were in the range of 6.6720.37 kJ/mol for SS; 1.51-6.87 kJ/mol for HZSM5; and 2.29-9.17 kJ/mol for AC, respectively. According to the results, AC and HZSM5 both were able to improve the reaction rate of SS pyrolysis by abridging the Em value. Moreover, to generate and examine the effect of the catalysts on the quality of bio-oil, a fixed-bed pyrolysis system was designed and implemented. The composition analysis of the produced bio-oil was carried out via gas chromatography/mass spectrometry (GC/MS). The selected SS to catalyst ratios were 1:1, 2:1 and 4:1. The optimum ratio in terms of cracking the long-chain hydrocarbons and removing oxygen-containing compounds was 1:1 for both catalysts. The upgraded bio-oils with HZSM5 and AC were in the total range of C4-C17 with around 72% in the range of C4-C9. The bio-oil from pyrolysis of SS contained 49.27% oxygenated compounds while the presence of HZSM5 and AC dropped to 7.3% and 13.02%, respectively. Meanwhile, generation of value-added chemicals such as light aromatic compounds were significantly improved in the catalytic process. Furthermore, the fabricated AC catalyst was characterized by BET, SEM-EDX, FT-IR and TGA techniques. Overall, this research demonstrated that AC is an efficient catalyst in the pyrolysis of SS and can be used as a cost-competitive catalyst in contrast to HZSM5. Z. C. is with the Department of Building, Civil, and Environmental Engineering, Concordia University, Montreal, Canada H3G 1M8 (corresponding author, e-mail: zhichen@bcee.concordia.ca). Keywords—Activated char, bio-oil, catalytic pyrolysis, HZSM5, sewage sludge.

Catalytic upgrading of the oil pyrolyzed from sewage sludge

Research on combustion characteristics of bio-oil from sewage sludge

Ex-Situ Catalytic Pyrolysis of Wastewater Sewage Sludge - A Micro-Pyrolysis Study

Researches on The Low-temperature Catalyst Pyrolysis of Sewage Sludge

Continuous Catalytic Pyrolysis of Oily Sludge Using U-shape Reactor for Producing Saturates-Enriched Light Oil

Low Temperature Pyrolysis Characteristics of Oil Sludge under Various Heating Conditions

Low-temperature catalytic conversion of alkaline sewage sludge bio-oil to biodiesel: Product characteristics and reaction mechanisms

Two-stage Catalytic Pyrolysis of Sewage Sludge for Syngas Production

Upgrading gas and oil products of the municipal solid waste pyrolysis process by exploiting in-situ interactions between the volatile compounds and the char

Character and Composition Analysis of Distilling Fractions from Sewage Sludge Pyrolysis Oil

Sustainable Pyrolytic Sludge-Char Preparation on Improvement of Closed-Loop Sewage Sludge Treatment: Characterization and Combined In-Situ Application.

Pyrolysis of sewage sludge in a benchtop fluidized bed reactor: Characteristics of condensates and non-condensable gases

Products obtained from catalytic pyrolysis of oily sludge over ZSM-5 zeolite

Influencing factors and product property of low temperature pyrolysis of oil sludge

Study on the effect of cyclic catalytic pyrolysis on sludge pyrolysis products

Catalytic liquefaction of sewage sludge to small molecular weight chemicals

Investigation of pyrolytic characteristics of three oily sludges with focus on properties of oil product

Pyrolysis of sewage sludge for sustainable biofuels and value-added biochar production

Catalytic Pyrolysis of Sewage Sludge for Upgrading Bio-Oil Quality Using Sludge-Based Activated Char as an Alternative to HZSM5

Study on the properties and components of solid-liquid products by co-pyrolysis of sludge and cotton stalk

Improvement of the pyrolysis products of oily sludge: Catalysts and catalytic process