Abstract:A technology of sewage sludge (SS) pyrolysis coupled with self-supplied steam reforming of the volatile is developed to utilize the latent heat of the steam vapor released in the SS drying & pyrolysis process. An integrated reactor consisting of a vertical free-falling pyrolysis section and a horizontal screw-moved reforming section is designed for this purpose. The performance of the reactor shows that by changing the moving speed of the char in the reforming section, high quality syngas with an H2/CO ratio of 4.37 and a percentage of H2 + CO up to 66.58 vol% can be obtained at approximately 570-600 °C for the dry SS. There is an optimum moving speed of the screw for producing the highest volume of the syngas. A higher moving speed of the screw also results in a higher concentration of the aromatic compounds in the final pyrolysis oil. When the initial moisture content of SS increases from 0 to 65.50%, the H2/CO ratio and H2/CO2 ratio in the syngas increase from 4.37 to 30.87 and from 2.1 to 2.6 correspondingly, and the final oil yield decreases from 24.03 wt% to 14.16 wt%. Moreover, the total energy recovery efficiency decreases from 88.85% to 61.92%, while the energy portion of syngas shows a peak of 44.18% of the total energy input when the initial moisture content is 41.26%. The integrated reactor also provides a good opportunity for adding a catalyst such as dolomite to make the process more effective. The technology developed in this paper provides an approach to deal with SS with a relatively high moisture content.

Two-stage Catalytic Pyrolysis of Sewage Sludge for Syngas Production

Ex-Situ Catalytic Pyrolysis of Wastewater Sewage Sludge - A Micro-Pyrolysis Study

Two-Stage Gasification of Sewage Sludge for Enhanced Hydrogen Production: Alkaline Pyrolysis Coupled with Catalytic Reforming Using Waste-Supported Ni Catalysts

Obtaining High Yield Hydrogen from Sewage Sludge by Two-Stage Gasification: Alkaline Pyrolysis Coupled with Catalytic Reforming.

Valorization of Sewage Sludge Through Catalytic Sub- and Supercritical Water Gasification

Researches on The Low-temperature Catalyst Pyrolysis of Sewage Sludge

A study of co-pyrolysis of sewage sludge and rice husk for syngas production based on a cyclic catalytic integrated process system

Syngas production by two-stage method of biomass catalytic pyrolysis and gasification

Sewage sludge steam gasification over bimetallic mesoporous Al-MCM48 catalysts for efficient hydrogen generation

Catalytic Pyrolysis of Petroleum Sludge for Production of Hydrogen-Enriched Syngas

Sewage sludge pyrolysis coupled with self-supplied steam reforming for high quality syngas production and the influence of initial moisture content

Pyrolysis of sewage sludge in a benchtop fluidized bed reactor: Characteristics of condensates and non-condensable gases

Low-temperature Alkaline Pyrolysis of Sewage Sludge for Enhanced H2 Production with In-Situ Carbon Capture

Sustainable valorisation of sewage sludge via carbon dioxide-assisted pyrolysis

Tar-free fuel gas production from high temperature pyrolysis of sewage sludge

A two-step process for sewage sludge treatment: Hydrothermal treatment of sludge and catalytic hydrothermal gasification of its derived liquid

Catalytic liquefaction of sewage sludge to small molecular weight chemicals

The Thermal Treatment Properties of the Tars from Sewage Sludge Gasification

Sewage sludge co-gasification in a pilot-scale two-stage fluidized bed gasifier for improved hydrogen production: Effects on sewage sludge moisture, metal species, and metal loading amount

Pyrolysis and Subsequent Direct Combustion of Pyrolytic Gases for Sewage Sludge Treatment in China

Thermo-catalytic pyrolysis of sewage sludge and techno-economic analysis: The effect of synthetic zeolites and natural sourced catalysts